Allis Chalmers A, 1939, does not run, have all parts to make it run, $3400 or reasonable offer, calls only, no voicemail or text; Floyd nnn-nnn-nnnn (Albany OR)
Allis Chalmers Speed Patrol WC, 1948, 10-foot grader glade, tires and engine are good, $2500 or reasonable offer, calls only, no voicemail or text; Floyd nnn-nnn-nnnn (Albany OR)
Allis Chalmers, 1939, parade quality, nice little tractor, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Case 1070, comes with Bush Hog 146 disc, both in working condition, six cylinder diesel with power shift transmission and runs great, Bush Hog is very heavy duty, 8-1/2 feet wide, 10 blade gang disc, lifts on four tires for transport, $9500 obo; David Wright nnn-nnn-nnnn (La Verne CA)
Case 300 diesel, 1956, utility, $1500; Ray Gossett nnn-nnn-nnnn - corrected (Hermiston OR)
Case 530, 1966, diesel, Case loader, 12 speed transmission, live PTO, power steering, new brakes, new injector pump and injectors, like new rear tires with rear weights, tractors starts and runs good, no leaks, $6000; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Case 580ck back hoes, one needs fuel pump, used to run good, other is parts tractor, $1500 for both; Tom Lord nnn-nnn-nnnn or xxxx@xxxx.xxx (Show Low AZ)
Case 600 Wheatland, 6-cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case 900, 1958, SN 8123855, external frost crack in block, has PTO, engine is free, most tin is good, remote hydraulics, can load or deliver, will part out or $1000 complete; Dave Schirrick nnn-nnn-nnnn no texts (Winnemucca NV)
Case 900, 1959, power steering, hydraulic, runs good, live PTO, $2500 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CK470 backhoe, rebuilt pump and bucket cylinder, needs work on outriggers and extension arm, can deliver to the right party; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case CO, 1936, was running, engine turns over, needs some tinkering, all new rubber, excellent sheet metal, $1200; John nnn-nnn-nnnn (Hanford CA)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DO, 1944, yard art, FREE; Dave nnn-nnn-nnnn (Covelo CA)
Case LA, factory propane, straight tin, good radiator, tires are in decent shape, motor is stuck, has tag, $1500; Fred nnn-nnn-nnnn (Buckley WA)
Case S/SC/SO parts, engine parts, nice clean block, rods and pistons, crank, head, lots of other engine and tractor parts, radiators, grilles; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VA, runs good, looks good, $950; Dave nnn-nnn-nnnn (Covelo CA)
Case VAC tractor parts, good complete running engine, $500. Front and rear wheel weights, rear drawbar, lots of engine parts, several grilles, radiators and miscellaneous VAC parts. Video available of engine running; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC, 1946, runs, no battery, $500; Dave nnn-nnn-nnnn (Covelo CA)
Case VAO, 1945, runs good, no battery, $550; Dave nnn-nnn-nnnn (Covelo CA)
Case/David Brown 990, runs fine, rebuilt 3pt hydraulics, draft control valve and remote take off, new clutch, needs power steering work, will deliver to right party, $3000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case/David Brown exhaust manifold, casting number 906744 AGA – E, $20 plus shipping. Hydrostatic hand pump, core, $50 or rebuilt $300, plus shipping; Ray Chrispens nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)
Caterpillar 30, complete, has early styled pads, can provide pics, $1000; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)
Caterpillar D2, SN 5J 1060 SP, with blade, tracks fair, $2000; Larry nnn-nnn-nnnn (Dexter OR)
Caterpillar D47U, very good condition, excellent tracks, pony motor with electric start, seat and seatback in very good condition, live hydraulics, used for many years but am retiring and no longer have a need, $2750 obo; John Moylan nnn-nnn-nnnn (Woodland CA)
Caterpillar D6, 1944, SN 4R18385P, runs, pushed dirt, steers, Isaacson blade, winch on back, has some oil leaks, $3500; Gary nnn-nnn-nnnn or text nnn-nnn-nnnn (Sheridan OR)
Caterpillar D73T dozer, 1943, runs very well, $10000, call for photos; Jack Fusari nnn-nnn-nnnn (Jensen UT)
Caterpillar grader, runs, needs rear tires, $800; Rick Parker nnn-nnn-nnnn (Lind WA)
Caterpillar parts: radiators for D2-5U and 22, core for 20PL, lights, few magnetos and track guns, miscellaneous other parts; John Hahn nnn-nnn-nnnn text ok (Craigmont ID)
Clark aircraft tug, 1943, Army Air Corp, ran when parked, pictures available, handyman available to help load most hours, $500; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Complete round tube wide front end to fit John Deere A, B, or G with split pedestal, complete including hubs, steering arms, tie rods, mounting plates, and all mounting bolts, nothing is broken ore repaired, everything in very good condition, ready to go to work on your tractor, $995. Also have split pedestal for model A and B, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall 450, gas, runs but may need work, wide front, good tires, can email photos, $1750; Dan nnn-nnn-nnnn (Columbia Falls MT)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A with AV front end and other AV parts, starts easily and runs well, excellent sheet metal and tires, $1900, email for photos and YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall C, complete with hydraulics, starter, generator, carburetor, etc. but likely stuck, $600, great for restoration, yard art or parts, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall Super H, 1953, SN 8439J, wide front, runs good, starts good, tires are good, $1900 obo; Richard Freitas nnn-nnn-nnnn (Zamora CA)
Ferguson TO-30, SN TO-107818, complete, was a good runner until PTO shaft twisted, Continental Z-129 engine, shaft is bent in very front, PTO will not engage, for parts or repair, $300 cash, must haul, no delivery; Myron White nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
Ferguson TO35, 1955, very strong motor, everything works, like new tires, very clean, $3500 obo; John Dornbusch nnn-nnn-nnnn (Brookings OR)
Ferrari, repainted, new tires, doing brakes now, $5500; Ken nnn-nnn-nnnn (Goldendale WA)
Ford 2N, 1944, with rear blade, runs and starts good, overrunning clutch, $1600, pictures available; Fred nnn-nnn-nnnn (Bandon OR)
Ford 420, 1977, with loader and Gannon scraper, new bucket cylinders, diesel engine, new rear tires, serviceable 11/16 fronts, $5000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 850, 1955-1956, runs good, starts good, tires are good, fenders have dent in top and needs a new seat, hood has been replaced, mechanics all good with work done, $1700 obo; Richard Freitas nnn-nnn-nnnn (Zamora CA)
Ford 8N, 1947, new cylinder, new piston and rings, new fluid, rebuilt pump, new front wheel bearings and seals, good clutch and throw out bearing, motor rehab, rebuilt starter, rebuilt distributor, 12V coil, 12V alternator, new 12V headlights, new engine oil and filter, rebuilt carburetor, clean fuel system, new hoses, new thermostat, new radiator, new belt, $4950; Terri nnn-nnn-nnnn (Medford OR)
Ford 8N, rebuilt motor, runs good, looks like a new one, good tires, 12V, $2750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 8Ns, one has dual transmission, has hole in oil pan from flying rod, both have some rust but basically all there, priced to sell as a pair with scrapper bucket and old blade; Terry Chandler nnn-nnn-nnnn or xxxx@xxxx.xxx (Yuma AZ)
Ford 9N, 1940, fresh paint, new tires, starts and runs great, $2250, pictures available; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, engine is loose and tractor pretty much complete, tin is poor, only $375, grandpa’s new wife is on a tear and says it has to go, can help with loading with little notice; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford Golden Jubilee, 1953, excellent condition, runs good, good tires, new paint, show quality, $2700; Rick Lopez nnn-nnn-nnnn (Loomis CA)
Fordson F, 1918-1923, from West Coast; Juha nnn-nnn-nnnn (Portland OR)
International 10-20 Titan; Buck nnn-nnn-nnnn (Ellensburg WA)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 464, with forklift, for parts; Ken nnn-nnn-nnnn (Goldendale WA)
International 650 engine, trade for W9 engine; Keith Busack nnn-nnn-nnnn (Longview WA)
International 660 with cab, $1800; Keith Busack nnn-nnn-nnnn (Longview WA)
International A, industrial, new fronts and one new rear, other rear 80-90%, has run, $700; Morrie Robinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Sedro Woolley WA)
International Cub, 1948, looks real good and runs good, with blade, $2200; Dave nnn-nnn-nnnn (Covelo CA)
International, 1950, with front blade, $1000; Keith Busack nnn-nnn-nnnn (Longview WA)
John Deere 1010 parts, lots of miscellaneous tractor, engine, hydraulic parts, fenders, radiator, hood and fuel tank; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
John Deere 40 Hi-Crop, $3500; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 40, 1955, early restoration, starts and runs good, good tires, good tag, $3100; John Shierman nnn-nnn-nnnn (Battle Ground WA)
John Deere 40, fairly nice, good tracks, drives great, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
John Deere 40, high crop, $3500; Vern nnn-nnn-nnnn (Exeter CA)
John Deere 4010, has spun bearing on #6 rod, $1500; Rick Parker nnn-nnn-nnnn (Lind WA)
John Deere 440I, gasoline wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of 440 manuals, $3700, email for photos and YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 4520, fair to good condition, year unknown, includes one new steer tire, all hardware and rear weights for dual rear tires, two extra rear rims, one extra rear tire, has newer seat, 3pt, $4500; Jim Regalia nnn-nnn-nnnn (Grass Valley CA)
John Deere 50, SN 5012078, wide front, runs and drives good, rebuilt carburetor, front tires like new, rear tires have weather checking, nice sheet metal, $1900; Dax Kimmelshue nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 520 hood, nice, $100; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 570A road grader, 17.5x25 tires and wheels, two of the rear tires need replacing, needs new Roosa Master injection pump JDB635MD2804, $6000; Beverley Lee nnn-nnn-nnnn (Jensen UT)
John Deere 630, SN 6303456, single front, owned and cut beans with this tractor for years, runs and drives great, good sheet metal, dual hydraulics, 3pt, no top link, tires matched but worn, just sitting in the barn ready for a new home, $3700; Dax Kimmelshue nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 720 nose piece, includes grille, needs paint, $150; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 800 swather, 18-foot draper, runs good, $800 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)
John Deere A, 1935, open shaft, new paint, starts good and runs good, steel wheels, nice tractor, $6500; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere A, 1936, SN 418806, unrestored, engine not stuck, $1200 obo; Dan Meyer nnn-nnn-nnnn (Placerville CA)
John Deere A, 1940, SN 493887, parts tractor, rough, missing cylinder head, carburetor, one piston, manifolds, front grilles, one rear wheel rusted out, can email pictures, $500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere A, 1944, brass tag, not stuck, SN 540420, ready for restoring or parts, has oil pressure, excellent tin including nose piece, both fuel tanks with caps in hood (no mounting brackets), flywheel tight on crankshaft, clutch works, pulley not cracked or chipped but missing cover, Power-Trol with rockshaft, has shutters and rod but missing control knob, no damage to radiator core, cast rear hubs for weight, all tires hold air, rears are 13.6x38 and are weather checked with about 10%, 5.50x16 fronts in good shape, steering wheel slightly bent and losing original hand grips, steering pedestal rewelded, left brake assembly is frozen and has been removed, gear has chipped teeth and part of mounting flange broken off, have fuel lines but no fuel valve, no muffler but have the pipe, no magneto or hitch/drawbar assembly, have some reassembly hardware, delivery possible (free/fee per destination headed to Grand Junction CO in July), can share more details and photos; Andy nnn-nnn-nnnn or xxxx@xxxx.xxx (San Luis Obispo CA)
John Deere A, ant eater, runs, has a wide front, $1800; Fred nnn-nnn-nnnn (Buckley WA)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AMT parts, have upper and lower mounting brackets for hydraulic tilt bed lift, should fit AMT 622 and 626, $40; Lance nnn-nnn-nnnn (Sebastopol CA)
John Deere AWH, 1946, spoke rear wheels, high clearance and wide front end, only 327 made in nine years of production, runs and drives, $2900, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere B, 1940, SN 89882, fair-good sheet metal, electric start, rockshaft, not running, needs tires, missing battery cover, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere B, SN 3124, runs good, nice paint, good rubber, $4500; Dan Meyer nnn-nnn-nnnn (Placerville CA)
John Deere BN, 1952, early restoration, starts and runs good, good tag and good tires, $2950; John Shierman nnn-nnn-nnnn (Battle Ground WA)
John Deere BO citrus fenders, original, in very good condition, $750; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)
John Deere BO Lindeman crawler, has ID tag but no numbers, nice runner, like new undercarriage, has hydraulic pump, new paint, runs good; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere D, 1948, restored in 2005; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, no tag, electric start, Roll-O-Matic front end, straight tin, older paint, engine overhauled and very few hours, can email pictures, $3100; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere GP, 1928, on steel, engine stuck, $800; Morrie Robinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Sedro Woolley WA)
John Deere L, Hercules engine, did a bunch of work on it, but ran out of time, needs a carburetor and tires, $1000; Sean Moylan nnn-nnn-nnnn (Woodland CA)
John Deere L, tin in very good shape; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere LA, SN 9097, runs good, good tires, rear wheel weights, generator not working, $2000 obo; Dan Meyer nnn-nnn-nnnn (Placerville CA)
John Deere L-LA-M front wheels, cast iron type, $35 each. JD wheel weights, L-4297T, for same wheels, $100 a pair; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere M, 1948s, have two, will sell together, SN 18412 and 22768, parts tractors, partially disassembled, includes parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere M, been restored in 2010, motor stuck; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere M, good tires, engine does not work, $300; Keith Busack nnn-nnn-nnnn (Longview WA)
John Deere MC, decent looking, decent tracks, runs and drives fine, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
John Deere MC, possible 40 engine, loose pads, supposed to run, but have never run it, somewhat of a ROP Lindeman blade, $1200; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
John Deere MC, straight tin, runs, $1000; Fred nnn-nnn-nnnn (Buckley WA)
John Deere MT, 1952, 12V, electric start, single front wheel, all new tires, nice paint and sheet metal, runs nice, $4200; John nnn-nnn-nnnn (Hanford CA)
Massey Ferguson 750 Combine, 20-foot straight pickup, runs good, $2000 obo; Don Kravik nnn-nnn-nnnn (Whitehall MT)
Massey Ferguson 98, 1960, 371 Detroit, rare, $35000; Daniel Brazil nnn-nnn-nnnn (Los Banos CA)
Massey Harris 25, 1925?, nice tractor, older paint, runs good, can email pictures, $4900; Buster Brown nnn-nnn-nnnn (Yuma AZ)
Massey Harris 30G, row crop, not running, fair-good sheet metal, 540 PTO, hydraulics, missing one rear tire and brake parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS4, 1948, restored in 2006; Dave nnn-nnn-nnnn (Grass Valley CA)
McCormick Deering OS4, parade quality, painted, runs and drives well, decent tires, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick W9, 1951, parts tractor, gas engine stuck, good 16.9x34 rears, good rims, no rust, live hydraulics, good fenders, three sets rear weights, $200 obo; Tom nnn-nnn-nnnn (Colburn ID)
Minneapolis Moline 5 Star, 1957, sheet metal rough, 3pt, 540 PTO, Amplitorque, tricycle front, 15.5-38 rears, need to be replaced, can email pictures, $3400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UBN, 1953, SN 06000140, propane, fuel tank needs service, good sheet metal, hydraulics, 540 PTO, Schwartz wide front, was running when parked, very rare tractor, very collectible, only 241 built, can email pictures, $4500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UBN, 1953, SN 06000140, propane, fuel tank needs service, good sheet metal, hydraulics, 540 PTO, Schwartz wide front, was running when parked, very rare tractor, very collectible, only 241 built, can email pictures, $4500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAN, 1952, SN 00800557, straight tractor, 540 PTO, hydraulics, cylinder is missing, has a front mounted tool bar, 12-38 tires, can email pictures, $800 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAN, 1952, SN 00800557, straight tractor, 540 PTO, hydraulics, cylinder is missing, has a front mounted tool bar, 12-38 tires, can email pictures, $800 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAN, 1952, SN 00800561, complete tractor, straight sheet metal, hydraulics, 540 PTO, Schwartz wide front, 13.6-38 tires, engine is loose, has red nose front, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAU, 1952, SN 00614462, complete tractor, straight sheet metal, was running when parked, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 gas tank, good condition, $50 includes shipping in US, other miscellaneous parts; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Oliver 88 standard, 1948, runs good, no smoke, has all new side panels and other restoration parts, tires have good tread and hold air, $1200 obo; Steve nnn-nnn-nnnn (Silverdale WA)
Oliver 99, 1955, 371 Detroit, $15000; Daniel Brazil nnn-nnn-nnnn (Los Banos CA)
Oliver, 1960, 471 Detroit, $9000; Daniel Brazil nnn-nnn-nnnn (Los Banos CA)
Petty Bone Mullion grader, all hydraulic, $2100; Rick Parker nnn-nnn-nnnn (Lind WA)
Rim, 11-38, drop center, for John Deere, Farmall and other row crop, came off Oliver 88, $100 delivered and one-year free WAIT subscription; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)