Allis Chalmers 170 gas fuel tank, good, $90; Paul Birkeland nnn-nnn-nnnn (Albany OR)
Allis Chalmers A, 1939, does not run, have all parts to make it run, $3400 or reasonable offer, calls only, no voicemail or text; Floyd nnn-nnn-nnnn (Albany OR)
Allis Chalmers M, 1936, wide gauge, ran good when parked, $750; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
Allis Chalmers Speed Patrol WC, 1948, 10-foot grader glade, tires and engine are good, $2500 or reasonable offer, calls only, no voicemail or text; Floyd nnn-nnn-nnnn (Albany OR)
Allis Chalmers WD with loader, survivor or restore, $1500; Fred nnn-nnn-nnnn no text (Longbranch WA)
Case 300 diesel, 1956, utility, $1500; Ray Gossett nnn-nnn-nnnn - corrected (Hermiston OR)
Case 400 engine and radiator, 251 cubic inch, has cracked heads and is stuck, no parts in it, $30. Radiator also for 400, good tanks, needs complete overhaul, $75; Richard Newman nnn-nnn-nnnn (Whitehall MT)
Case 530, 1966, diesel, Case loader, 12 speed transmission, live PTO, power steering, new brakes, new injector pump and injectors, like new rear tires with rear weights, tractors starts and runs good, no leaks, $6000; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Case 580ck back hoes, one needs fuel pump, used to run good, other is parts tractor, $1500 for both; Tom Lord nnn-nnn-nnnn or xxxx@xxxx.xxx (Show Low AZ)
Case 600 Wheatland, 6-cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CK470 backhoe, rebuilt pump and bucket cylinder, needs work on outriggers and extension arm, can deliver to the right party; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case CO, 1936, was running, engine turns over, needs some tinkering, all new rubber, excellent sheet metal, $1200; John nnn-nnn-nnnn (Hanford CA)
Case D, good running, excellent tires, $1800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case M3B, crawler forklift, factory made, rare, made from a Case 310, only about 80 made in the 1950s, four cylinder gas, very nice shape throughout, probably one of the nicest to exist, $9500 or reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case parts for models D, S, DC, SC, lots of good parts cheap; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case S, very nice tractor, good tires, good runner, $1600 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case S/SC/SO parts, engine parts, nice clean block, rods and pistons, crank, head, lots of other engine and tractor parts, radiators, grilles; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case SO, new head, been repainted, four new tires, runs great, $1500; Robert Harvey nnn-nnn-nnnn (Red Bluff CA)
Case tractors: VAC wide front, good tractor, $1500. DC LP, to restore, engine stuck, $1500. DC wide front, survivor or restore, $1600; Fred nnn-nnn-nnnn no text (Longbranch WA)
Case VAC tractor parts, good complete running engine, $500. Front and rear wheel weights, rear drawbar, lots of engine parts, several grilles, radiators and miscellaneous VAC parts. Video available of engine running; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case/David Brown 990, runs fine, rebuilt 3pt hydraulics, draft control valve and remote take off, new clutch, needs power steering work, will deliver to right party, $3000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Caterpillar 15, SN PV5957, runs and drives, ask about spare parts tractors, carburetors and magnetos, $1800; Ted nnn-nnn-nnnn (Murrieta CA)
Caterpillar 15, SN PV6449, runs and drives, ask about spare parts tractors, carburetors and magnetos, $1600; Ted nnn-nnn-nnnn (Murrieta CA)
Caterpillar 2 Ton, SN 76639, broken timing gear, price includes separate parts tractor, $2500; Ted nnn-nnn-nnnn (Murrieta CA)
Caterpillar 20, runs, $1500; Ted nnn-nnn-nnnn (Murrieta CA)
Caterpillar D2, 1952, wide gauge, orchard seat, runs good, very clean, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
Caterpillar D6, 1944, SN 4R18385P, runs, pushed dirt, steers, Isaacson blade, winch on back, has some oil leaks, $3500; Gary nnn-nnn-nnnn or text nnn-nnn-nnnn (Sheridan OR)
Caterpillar D73T dozer, 1943, runs very well, $10000, call for photos; Jack Fusari nnn-nnn-nnnn (Jensen UT)
Caterpillar D8H36A, direct drive, equipped with hinged ripper with two shanks, cable straight blade with hydraulic tilt, runs good, ready to go to a job, undercarriage 60% with new sprocket segments, $13000, can send pictures; Paul Valentine nnn-nnn-nnnn (Templeton CA)
Caterpillar grader, runs, needs rear tires, $800; Rick Parker nnn-nnn-nnnn (Lind WA)
Clark aircraft tug, 1943, Army Air Corp, ran when parked, pictures available, handyman available to help load most hours, $500; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Cletrac crawler, wide gauge, special serial number, last one off the assembly line from a long run, ran good when parked, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
Earthmaster tractors: Hollydale built, to restore or use, $2000. Burbank built, $2000; Fred nnn-nnn-nnnn no text (Longbranch WA)
Farmall 400, 1956, wide front, diesel, good tires, ran when parked, $750; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
Farmall 450, gas, runs but may need work, wide front, good tires, can email photos, $1750; Dan nnn-nnn-nnnn (Columbia Falls MT)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A with AV front end and other AV parts, starts easily and runs well, excellent sheet metal and tires, $1900, email for photos and YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall battery box, fits Cub, complete, used but excellent condition reproduction box, includes hardware, $30; Paul Birkeland nnn-nnn-nnnn (Albany OR)
Farmall high crop, rare, runs good, starts good, good tires, $1995 or make offer, need to find a new home; Bob nnn-nnn-nnnn or nnn-nnn-nnnn (Fresno CA)
Farmall M, starts and runs good, tires are good, cleaned it, painted it, put new decals and seat cushion, single front tire, email for pictures, $2850; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
Farmall MD, engine not stuck but not running, like new tires and after market 3pt, Schwartz wide front, $800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall Super C, 1953, all original, very straight tin, runs great, starts good, early 90s restoration, stored in barn, original hand crank, belt pulley with factory guard, PTO with factory guard, real sweet running machine, $800 obo; Dale Roth nnn-nnn-nnnn (Sweet Home OR)
Farmall Super H, 1953, SN 8439J, wide front, runs good, starts good, tires are good, $1900 obo; Richard Freitas nnn-nnn-nnnn (Zamora CA)
Farmall tractors: Cub with implements, $2500. TD-35, 1936, pull cat 22-inch pads, $4500; Fred nnn-nnn-nnnn no text (Longbranch WA)
Ferguson 135, fixed up, cleaned up, new paint, decals and seat, gas, starts and runs good, power steering, good rubber, email for pictures, $4500; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
Ferguson 2135, heavy duty industrial tractor, heavy-duty six-foot loader, power steering, been painted, new seat, good tires, starts and runs good, email for pictures call for info; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
Ferguson TO-30, SN TO-107818, complete, was a good runner until PTO shaft twisted, Continental Z-129 engine, shaft is bent in very front, PTO will not engage, for parts or repair, $300 cash, must haul, no delivery; Myron White nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
Ford 420, 1977, with loader and Gannon scraper, new bucket cylinders, diesel engine, new rear tires, serviceable 11/16 fronts, $5000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 850, 1955-1956, runs good, starts good, tires are good, fenders have dent in top and needs a new seat, hood has been replaced, mechanics all good with work done, $1700 obo; Richard Freitas nnn-nnn-nnnn (Zamora CA)
Ford Golden Jubilee, 1953, excellent condition, runs good, good tires, new paint, show quality, $2700; Rick Lopez nnn-nnn-nnnn (Loomis CA)
Ford tractors: 8N Funk conversion, 6-cylinder flathead, runs, to restore, $2500. 8N, 12V conversion, fair tractor, $1250. 8N, runs, needs steering work, $700; Fred nnn-nnn-nnnn no text (Longbranch WA)
Fordson F, 1918-1923, from West Coast; Juha nnn-nnn-nnnn (Portland OR)
Fordson, cast front wheels and gas tank for the hood, $2500; Fred nnn-nnn-nnnn no text (Longbranch WA)
International 10-20 Titan; Buck nnn-nnn-nnnn (Ellensburg WA)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 650 engine, trade for W9 engine; Keith Busack nnn-nnn-nnnn (Longview WA)
International 660 with cab, $1800; Keith Busack nnn-nnn-nnnn (Longview WA)
International A, industrial, new fronts and one new rear, other rear 80-90%, has run, $700; Morrie Robinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Sedro Woolley WA)
International T5, 1960, wide gauge, ran when parked, $3000; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
International T9 crawler, with blade, gas motor, not running, offer; Hubert nnn-nnn-nnnn (Bend OR)
International, 1950, with front blade, $1000; Keith Busack nnn-nnn-nnnn (Longview WA)
John Deer 420C, five roller, long track, rare model, heavy duty hydraulic tilt blade, manual angle, hard to find 3pt, no top link, good undercarriage, good sheet metal, canopy, reverser does not work, but main transmission works great both reverse and forward gears, has a recent main clutch, steers both ways, very nice hard to find machine, drives out good, $7500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 1010 parts, lots of miscellaneous tractor, engine, hydraulic parts, fenders, radiator, hood and fuel tank; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
John Deere 40 Hi-Crop, $3500; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 4010, has spun bearing on #6 rod, $1500; Rick Parker nnn-nnn-nnnn (Lind WA)
John Deere 40S, 1953, SN 63537, starts and runs good, front end, transmission and final drive rebuilt, new front tires, rear tires at about 30%, has POT and single hydraulic valve, needs some body work on the hood and repainted, $2500; Robert Meeks nnn-nnn-nnnn or xxxx@xxxx.xxx (Ukiah CA)
John Deere 40U, running when parked in shed, but not running now, lost ambition to restore, $2750; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 420, crawler, long track, Holt hydraulic tilt blade, sat for years, good track chain, pads and sprockets are wore but usable, motor stuck, crawler complete with canopy, good sheet metal, selling as is for parts or restore, can ship, $2200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420, crawler, nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, good oil pressure, steers excellent, real nice undercarriage probably about 90%, clean little crawler, nice sheet metal, PTO off back, $4900, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 4520, fair to good condition, year unknown, includes one new steer tire, all hardware and rear weights for dual rear tires, two extra rear rims, one extra rear tire, has newer seat, 3pt, $4500; Jim Regalia nnn-nnn-nnnn (Grass Valley CA)
John Deere 50, 1955, SN 5024484, fixed up, cleaned, new paint and decals, recovered seat, tires are good, starts and runs great, email for pictures, call for info, $2800; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
John Deere 50, SN 5012078, wide front, runs and drives good, rebuilt carburetor, front tires like new, rear tires have weather checking, nice sheet metal, $1900; Dax Kimmelshue nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 570A road grader, 17.5x25 tires and wheels, two of the rear tires need replacing, needs new Roosa Master injection pump JDB635MD2804, $6000; Beverley Lee nnn-nnn-nnnn (Jensen UT)
John Deere 60, like new, new tires all around, new rims on back, V front, new paint, decals and redone seat, starts and runs great, email for pictures or call for info, $3600; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
John Deere 630, SN 6303456, single front, owned and cut beans with this tractor for years, runs and drives great, good sheet metal, dual hydraulics, 3pt, no top link, tires matched but worn, just sitting in the barn ready for a new home, $3700; Dax Kimmelshue nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere A, 1935, open shaft, new paint, starts good and runs good, steel wheels, nice tractor, $6500; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere A, 1940, SN 493887, parts tractor, rough, missing cylinder head, carburetor, one piston, manifolds, front grilles, one rear wheel rusted out, can email pictures, $500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere A, 1944, row crop, restored 15 years ago and only used for occasional parades, built during WWII when tractor production was at its lowest, hand start, new tires when restored, $2000; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AMT parts, have upper and lower mounting brackets for hydraulic tilt bed lift, should fit AMT 622 and 626, $40; Lance nnn-nnn-nnnn (Sebastopol CA)
John Deere AWH, 1946, spoke rear wheels, high clearance and wide front end, only 327 made in nine years of production, runs and drives, $2900, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere B, 1940, SN 89882, fair-good sheet metal, electric start, rockshaft, not running, needs tires, missing battery cover, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere BO citrus fenders, original, in very good condition, $750; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)
John Deere BO Lindeman crawler, has ID tag but no numbers, nice runner, like new undercarriage, has hydraulic pump, new paint, runs good; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere D, 1948, restored in 2005; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere D, about 1949, older restoration, with good tires, good runner, $4000 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, no tag, electric start, Roll-O-Matic front end, straight tin, older paint, engine overhauled and very few hours, can email pictures, $3100; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere GP, 1928, on steel, engine stuck, $800; Morrie Robinson nnn-nnn-nnnn or xxxx@xxxx.xxx (Sedro Woolley WA)
John Deere H to HN conversion, complete kit with pedestal, fork, cast single wheel, case, and SN, $750, can ship truck freight or UPS, email for photos or vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere L or LA, unsure which, new front tires, back tires are good, runs but needs work, $1800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere L, 1939, older restoration, hard to find with all original parts, which include: Firestone original tread rear tires, starting crank, tool tray, seat, driveline cover, drawbar rollers, throttle linkage, fenders with no dents, radiator in nice condition with no repairs, steering wheel, belt pulley, foot rest pans with brake locks, etc., has excellent manifold with no cracks or repairs, brakes work well, starts and runs good, has hand painted lettering, very nice little tractor, could use cleaning and touch up paint to make it pristine, but looks and shows good as is, ready to show or parade, may consider partial trade for Model T engine/transmission, $3600 obo; Jim Harry nnn-nnn-nnnn (Ellensburg WA)
John Deere L, tin in very good shape; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere Lindeman crawler, SN 336345, complete, stored indoors, good condition, $3700; Ted nnn-nnn-nnnn (Murrieta CA)
John Deere L-LA-M front wheels cast iron type, $35 each. JD wheel weights, L-4297T, for same wheels, $100 a pair; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere M and 40 vertical engines, two of each, #M64T blocks, not stuck, rebuildable, make offer; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)
John Deere M, 1948s, have two, will sell together, SN 18412 and 22768, parts tractors, partially disassembled, includes parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere M, been restored in 2010, motor stuck; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere M, good tires, engine does not work, $300; Keith Busack nnn-nnn-nnnn (Longview WA)
John Deere MT, 1952, 12V, electric start, single front wheel, all new tires, nice paint and sheet metal, runs nice, $4200; John nnn-nnn-nnnn (Hanford CA)
John Deere parts: everything on the shelf and ready to ship. JD H, good sheet metal, block, head and other parts. JD Hercules L, good sheet metal, NXB block, and more. JD styled A, good block and head, and much more. Email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere two-cylinder crawler parts, engine parts, gears, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Massey Ferguson 135, 1970, SN 9A120780, Perkins three cylinder diesel, starts and runs good, has eight speed transmission, two spool hydraulic valve, PTO, 3pt valve needs work, goes up and down, but doesn’t hold any position, $1600; Robert Meeks nnn-nnn-nnnn or xxxx@xxxx.xxx (Ukiah CA)
Massey Ferguson 98, 1960, 371 Detroit, rare, $35000; Daniel Brazil nnn-nnn-nnnn (Los Banos CA)
Massey Harris 25, 1925?, nice tractor, older paint, runs good, can email pictures, $4900; Buster Brown nnn-nnn-nnnn (Yuma AZ)
Massey Harris 30G, row crop, not running, fair-good sheet metal, 540 PTO, hydraulics, missing one rear tire and brake parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris Ferguson 35 (that’s what the tag says), starts and runs good, new paint, decal and seat, power steering, all works good, does have smaller rear tires than normal, probably for grapes or orchard, email for pictures; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)
Massey Harris tractors: 44 with loader, survivor, $2850. Pony with front blade, $1500. 33 with loader, engine stuck, $1000; Fred nnn-nnn-nnnn no text (Longbranch WA)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS4, 1948, restored in 2006; Dave nnn-nnn-nnnn (Grass Valley CA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick W9, 1951, parts tractor, gas engine stuck, good 16.9x34 rears, good rims, no rust, live hydraulics, good fenders, three sets rear weights, $200 obo; Tom nnn-nnn-nnnn (Colburn ID)
Minneapolis Moline 400 series military issue, only 286 made, aftermarket 3pt, $3000; Fred nnn-nnn-nnnn no text (Longbranch WA)
Minneapolis Moline 5 Star, 1957, sheet metal rough, 3pt, 540 PTO, Amplitorque, tricycle front, 15.5-38 rears, need to be replaced, can email pictures, $3400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UBN, 1953, SN 06000140, propane, fuel tank needs service, good sheet metal, hydraulics, 540 PTO, Schwartz wide front, was running when parked, very rare tractor, very collectible, only 241 built, can email pictures, $4500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAN, 1952, SN 00800557, straight tractor, 540 PTO, hydraulics, cylinder is missing, has a front mounted tool bar, 12-38 tires, can email pictures, $800 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAN, 1952, SN 00800561, complete tractor, straight sheet metal, hydraulics, 540 PTO, Schwartz wide front, 13.6-38 tires, engine is loose, has red nose front, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAU, 1952, SN 00614462, complete tractor, straight sheet metal, was running when parked, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Oliver 35, 1941, very rare, 401 made for WWII, runs good, took to shows, very clean, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)
Oliver 70 parts tractors, two available, $200 each. Lots of Oliver 70 parts: radiators, engine parts, rims; Larry nnn-nnn-nnnn (Dexter OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77, wide front, new tires on front, does run, needs governor work, also another Oliver 77 parts tractor with good rear rims, $1400 for both obo; Paul Valentine nnn-nnn-nnnn (Marlin WA)
Oliver 99, 1955, 371 Detroit, $15000; Daniel Brazil nnn-nnn-nnnn (Los Banos CA)