October 2020 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers 170 gas fuel tank, good, $90; Paul Birkeland nnn-nnn-nnnn (Albany OR)

Allis Chalmers 6B dozer, 1957, Carco winch, manual angle blade, canopy, four-cylinder diesel, turns and runs good, ready to work, $6500 obo; Robert Doud nnn-nnn-nnnn or xxxx@xxxx.xxx (Chiloquin OR)

Allis Chalmers M, 1936, wide gauge, ran good when parked, $750; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

Allis Chalmers WD with loader, survivor or restore, $1500; Fred nnn-nnn-nnnn no text (Longbranch WA)

Best combine sickle guards, have several, $5 each plus shipping; David Ruark nnn-nnn-nnnn (Pomeroy WA)

Case 400 engine and radiator, 251 cubic inch, has cracked heads and is stuck, no parts in it, $30. Radiator also for 400, good tanks, needs complete overhaul, $75; Richard Newman nnn-nnn-nnnn (Whitehall MT)

Case 411B, 1957, with Case-O-Matic, restored approximately seven years ago including new paint and new front tires, 14.9-28 rears with 70-80% tread, two remotes, starts right up, used as a parade tractor, needs a couple of minor repairs, $2500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)

Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CC, 1934, restored in 2010 with all new rubber and paint, starts on second or third pull, lots of compression, runs great, lift pump, needs brake work, needs to be seen, $3000 tractor, but will sacrifice at $1500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)

Case D, good running, excellent tires, $1800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case DC, 1944, adjustable front end, restored eight years ago with new paint and rubber on all four wheels, looks great, runs and drives good, needs a few minor repairs, $1500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)

Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics and Eagle hitch, runs, needs some tinkering, $550; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case M3B, crawler forklift, factory made, rare, made from a Case 310, only about 80 made in the 1950s, four cylinder gas, very nice shape throughout, probably one of the nicest to exist, $9500 or reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case parts for models D, S, DC, SC, lots of good parts cheap; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case S, very nice tractor, good tires, good runner, $1600 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case SO, new head, been repainted, four new tires, runs great, $1500; Robert Harvey nnn-nnn-nnnn (Red Bluff CA)

Case tractors: VAC wide front, good tractor, $1500. DC LP, to restore, engine stuck, $1500. DC wide front, survivor or restore, $1600; Fred nnn-nnn-nnnn no text (Longbranch WA)

Case VA, 1948?, no SN tag, radiator made 11/1947, original owner stated it is a 1948, decaled VAC incorrectly, older restoration with not enough paint, tin work is very good, runs good, new tires on front, good rear tires. Also have a Case mower of the correct vintage if wanted. $900 for the tractor, $25 for the mower; Don Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)

Caterpillar 15, SN PV5957, runs and drives, ask about spare parts tractors, carburetors and magnetos, $1800; Ted nnn-nnn-nnnn (Murrieta CA)

Caterpillar 15, SN PV6449, runs and drives, ask about spare parts tractors, carburetors and magnetos, $1600; Ted nnn-nnn-nnnn (Murrieta CA)

Caterpillar 2 Ton, SN 76639, broken timing gear, price includes separate parts tractor, $2500; Ted nnn-nnn-nnnn (Murrieta CA)

Caterpillar 20, runs, $1500; Ted nnn-nnn-nnnn (Murrieta CA)

Caterpillar D2, 1952, wide gauge, orchard seat, runs good, very clean, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

Caterpillar D8H36A, direct drive, equipped with hinged ripper with two shanks, cable straight blade with hydraulic tilt, runs good, ready to go to a job, undercarriage 60% with new sprocket segments, $13000, can send pictures; Paul Valentine nnn-nnn-nnnn (Templeton CA)

Cletrac crawler, wide gauge, special serial number, last one off the assembly line from a long run, ran good when parked, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

Earthmaster tractors: Hollydale built, to restore or use, $2000. Burbank built, $2000; Fred nnn-nnn-nnnn no text (Longbranch WA)

Farmall 400, 1956, wide front, diesel, good tires, ran when parked, $750; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

Farmall A to 450 sheet metal plus miscellaneous parts. Farmall H rear skeleton wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall battery box, fits Cub, complete, used but excellent condition reproduction box, includes hardware, $30; Paul Birkeland nnn-nnn-nnnn (Albany OR)

Farmall Cub parts: one front wheel, $10. Two rear rims, $45 each. Two fenders, $40 each. One hood/gas tank, $40. One front axle, $50. One radiator, $30. One dash, instruments, $25; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Cub, 1948, good rubber, belly blade, good condition, new paint, $2200; Orval nnn-nnn-nnnn (Lebanon OR)

Farmall Cub, 1950, SN 103634, painted white as it was a dealer demonstrate tractor, $2500; Jim nnn-nnn-nnnn (Butte MT)

Farmall high crop, rare, runs good, starts good, good tires, $1995 or make offer, need to find a new home; Bob nnn-nnn-nnnn or nnn-nnn-nnnn (Fresno CA)

Farmall M, starts and runs good, tires are good, cleaned it, painted it, put new decals and seat cushion, single front tire, email for pictures, $2850; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

Farmall MD, engine not stuck but not running, like new tires and after market 3pt, Schwartz wide front, $800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall Super C, 1953, all original, very straight tin, runs great, starts good, early 90s restoration, stored in barn, original hand crank, belt pulley with factory guard, PTO with factory guard, real sweet running machine, $800 obo; Dale Roth nnn-nnn-nnnn (Sweet Home OR)

Farmall tractors: Cub with implements, $2500. TD-35, 1936, pull cat 22-inch pads, $4500; Fred nnn-nnn-nnnn no text (Longbranch WA)

Ferguson 135, fixed up, cleaned up, new paint, decals and seat, gas, starts and runs good, power steering, good rubber, email for pictures, $4500; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

Ferguson 2135, heavy duty industrial tractor, heavy-duty six-foot loader, power steering, been painted, new seat, good tires, starts and runs good, email for pictures call for info; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

Ferguson TE 3411, one with aluminum transmission and casing, no starter, will trader for old double barrel shotgun; Edward Barbosa nnn-nnn-nnnn (Morgan Hill CA)

Ford 2N/8N equipment package, proof meter, swinging drawbar, scalloped rear rims, extended steering column, engine has 90 over pistons, four ring high dome, power piston package, new tires, new sheet metal, 3pt rear scoop that is reversible, five row 3pt cultivator, rebuilt 3pt six foot disc, six foot 3pt back blade, tractor also has a front grille guard, side air breather with canister, less than two hours on rebuilt engine, $10000; Robert nnn-nnn-nnnn (Benton City WA)

Ford tractors: 8N Funk conversion, 6-cylinder flathead, runs, to restore, $2500. 8N, 12V conversion, fair tractor, $1250. 8N, runs, needs steering work, $700; Fred nnn-nnn-nnnn no text (Longbranch WA)

Fordson, cast front wheels and gas tank for the hood, $2500; Fred nnn-nnn-nnnn no text (Longbranch WA)

Injector pumps, Roosa Master Model 450128, $500 obo; Phil nnn-nnn-nnnn (Redmond OR)

International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

International T5, 1960, wide gauge, ran when parked, $3000; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

International T9 crawler, with blade, gas motor, not running, offer; Hubert nnn-nnn-nnnn (Bend OR)

International TD9 dozer, has not run in many years, ran when parked, good eight-foot straight blade, 22-inch tracks, undercarriage looks pretty good, though not an expert, can send pictures; Jay Spenst nnn-nnn-nnnn or xxxx@xxxx.xxx (Ephrata WA)

John Deer 420C, five roller, long track, rare model, heavy duty hydraulic tilt blade, manual angle, hard to find 3pt, no top link, good undercarriage, good sheet metal, canopy, reverser does not work, but main transmission works great both reverse and forward gears, has a recent main clutch, steers both ways, very nice hard to find machine, drives out good, $7500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 3020, 1966, SN T113R086427R, 4.4L diesel, 70 hp, synchro transmission, two new batteries, new seat, radiator flushed and cleaned, runs great, showroom clean, $15000 obo; Ron nnn-nnn-nnnn (Amity OR)

John Deere 40S, 1953, SN 63537, starts and runs good, front end, transmission and final drive rebuilt, new front tires, rear tires at about 30%, has POT and single hydraulic valve, needs some body work on the hood and repainted, $2500; Robert Meeks nnn-nnn-nnnn or xxxx@xxxx.xxx (Ukiah CA)

John Deere 40U, running when parked in shed, but not running now, lost ambition to restore, $2750; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 420 hood and nose piece, some rust and dents, $200 obo for the pair; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

John Deere 420, crawler, long track, Holt hydraulic tilt blade, sat for years, good track chain, pads and sprockets are wore but usable, motor stuck, crawler complete with canopy, good sheet metal, selling as is for parts or restore, can ship, $2200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420, crawler, nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, good oil pressure, steers excellent, real nice undercarriage probably about 90%, clean little crawler, nice sheet metal, PTO off back, $4900, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 50, 1955, SN 5024484, fixed up, cleaned, new paint and decals, recovered seat, tires are good, starts and runs great, email for pictures, call for info, $2800; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

John Deere 60, like new, new tires all around, new rims on back, V front, new paint, decals and redone seat, starts and runs great, email for pictures or call for info, $3600; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

John Deere 620 gasket set less carburetor gasket, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 70, diesel, runs, has wide front end, converted to electric start, $3000; Chris Carl nnn-nnn-nnnn (Stanwood WA)

John Deere A, 1936, unstyled, not running, best offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere A, 1940, SN 493887, parts tractor, rough, missing cylinder head, carburetor, one piston, manifolds, front grilles, one rear wheel rusted out, can email pictures, $500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

John Deere A, 1944, row crop, restored 15 years ago and only used for occasional parades, built during WWII when tractor production was at its lowest, hand start, new tires when restored, $2000; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)

John Deere A, B, G, H, M, 50 and 60 parts. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere AN, 1939, restored, good runner, $2000; Chris Carl nnn-nnn-nnnn (Stanwood WA)

John Deere AN, 1951, good tires, runs well, $1250; Chris Carl nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1936, on factory round spokes, runs and drives, $2750; Chris Carl nnn-nnn-nnnn (Stanwood WA)

John Deere B, 1940, SN 89882, fair-good sheet metal, electric start, rockshaft, not running, needs tires, missing battery cover, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

John Deere B, 1943, tricycle, nice tin, runs well, $1500; Chris Carl nnn-nnn-nnnn (Stanwood WA)

John Deere BN, 1952, early restoration, starts and runs good, good tires, good tag, $2500; John Shierman nnn-nnn-nnnn (Battle Ground WA)

John Deere D, about 1949, older restoration, with good tires, good runner, $4000 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2350; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere H to HN conversion, complete kit with pedestal, fork, cast single wheel, case, and SN, $750, can ship truck freight or UPS, email for photos or vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere L or LA, unsure which, new front tires, back tires are good, runs but needs work, $1800 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere L, 1939, older restoration, hard to find with all original parts, which include: Firestone original tread rear tires, starting crank, tool tray, seat, driveline cover, drawbar rollers, throttle linkage, fenders with no dents, radiator in nice condition with no repairs, steering wheel, belt pulley, foot rest pans with brake locks, etc., has excellent manifold with no cracks or repairs, brakes work well, starts and runs good, has hand painted lettering, very nice little tractor, could use cleaning and touch up paint to make it pristine, but looks and shows good as is, ready to show or parade, may consider partial trade for Model T engine/transmission, $3600 obo; Jim Harry nnn-nnn-nnnn (Ellensburg WA)

John Deere LA, 1945, SN 11102, new paint, decals and rubber, photos available, $3500 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

John Deere Lindeman crawler, SN 336345, complete, stored indoors, good condition, $3700; Ted nnn-nnn-nnnn (Murrieta CA)

John Deere M and 40 vertical engines, two of each, #M64T blocks, not stuck, rebuildable, make offer; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)

John Deere M, 1948s, have two, will sell together, SN 18412 and 22768, parts tractors, partially disassembled, includes parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

John Deere parts: Just parted, everything on the shelf and ready to ship, John Deere H, JD Hercules L (good sheet metal and NXB block, and many other parts), JD styled A, good block, head and many more parts), email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere tractors: 1949 M, 1949 B, 1947 pan seat G, delivery available at reasonable rate; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)

John Deere two-cylinder crawler parts, engine parts, gears, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey Ferguson 135, 1970, SN 9A120780, Perkins three cylinder diesel, starts and runs good, has eight speed transmission, two spool hydraulic valve, PTO, 3pt valve needs work, goes up and down, but doesn’t hold any position, $1600; Robert Meeks nnn-nnn-nnnn or xxxx@xxxx.xxx (Ukiah CA)

Massey Ferguson 202, 1962, industrial model, Gannon on back, no loader, delivery available at reasonable rate; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)

Massey Harris 30G, row crop, not running, fair-good sheet metal, 540 PTO, hydraulics, missing one rear tire and brake parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Harris Ferguson 35 (that’s what the tag says), starts and runs good, new paint, decal and seat, power steering, all works good, does have smaller rear tires than normal, probably for grapes or orchard, email for pictures; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

Massey Harris tractors: 44 with loader, survivor, $2850. Pony with front blade, $1500. 33 with loader, engine stuck, $1000; Fred nnn-nnn-nnnn no text (Longbranch WA)

McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering WK-40, full steel, original engine free, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis Moline 400 series military issue, only 286 made, aftermarket 3pt, $3000; Fred nnn-nnn-nnnn no text (Longbranch WA)

Minneapolis Moline 5 Star, 1957, sheet metal rough, 3pt, 540 PTO, Amplitorque, tricycle front, 15.5-38 rears, need to be replaced, can email pictures, $3400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline UBN, 1953, SN 06000140, propane, fuel tank needs service, good sheet metal, hydraulics, 540 PTO, Schwartz wide front, was running when parked, very rare tractor, very collectible, only 241 built, can email pictures, $4500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline ZAN, 1952, SN 00800561, complete tractor, straight sheet metal, hydraulics, 540 PTO, Schwartz wide front, 13.6-38 tires, engine is loose, has red nose front, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline ZAU, 1952, SN 00614462, complete tractor, straight sheet metal, was running when parked, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 35, 1941, very rare, 401 made for WWII, runs good, took to shows, very clean, $3500; Tom Venable nnn-nnn-nnnn (Klamath Falls OR)

Oliver 70 parts tractors, two available, $200 each. Lots of Oliver 70 parts: radiators, engine parts, rims; Larry nnn-nnn-nnnn (Dexter OR)

Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver 70, tricycle, Warn winch on back, 12V, ran when parked 12 years ag in the shed, engine not stuck, tires fair and still holding air, $500 obo; Ron nnn-nnn-nnnn (Amity OR)

Oliver 77, wide front, new tires on front, does run, needs governor work, also another Oliver 77 parts tractor with good rear rims, $1400 for both obo; Paul Valentine nnn-nnn-nnnn (Marlin WA)

Oliver OC3 and Cletrac HG crawler parts, engine parts, magnetos, sheet metal, rollers, etc., would like to sell all, come and make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver tractors: OC4, diesel, loader, $5000. OC4, dozer, five-foot straight blade, factory 3pt, $3500. OC6, dozer, aftermarket 3pt, no blade, $3500; Fred nnn-nnn-nnnn no text (Longbranch WA)

Oliver, don’t run, $1000 obo; Warren Berg nnn-nnn-nnnn (North Highlands CA)

Rims: John Deere 12-24 waffle rims with matched tires, some weather cracking, open to offers; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)

Tractor collection for sale: two John Deeres, LA and H, two Internationals (Cubs), and one Allis Chalmers. Also have Moline thresher, JD potato planter and grain drill, look for “Tractors for sale” on Bend OR craigslist, priced from $3000 to $5500; Tom nnn-nnn-nnnn (Madras OR)

Tractor collection: John Deere H, all fixed up and painted with new decals, hand start, row crop, $2600. Case V, 1941, said to be a fairly rare tractor, cast iron wheels front and rear, flat head Hercules motor, starts and runs good, tires are fairly good, $1000. International 300, heavy duty loader, field run, used all the time, loader works good, starts and runs good, power steering, single front tire, $4600. Farmall H with loader, parts or could fix up, as is where is, don’t know anything, bought for parts but didn’t need any, $500. JD B, 42-inch tires, pretty good, had it for a while, think it runs, did a few years ago, could be restored, $1200. JD B for parts, $400. JD 420, 1956, wide front, fixed up, cleaned up, new paint and decals, seat redone, 3pt, starts and runs good, good tires, $3200. Selling out tractor collection/hobby, thanks for looking, email for photos; Ken Ruthardt nnn-nnn-nnnn or xxxx@xxxx.xxx (Yakima WA)

Turf tires: two 13.6x16 mounted on John Deere six-hole compact tractor wheels. Two 25 8.50x14 unmounted, all with 90% tread, $650; John Shierman nnn-nnn-nnnn (Battle Ground WA)

Wheel weights off 580 Case Construction King, $200 obo; Phil nnn-nnn-nnnn (Redmond OR)

Wheels, rear, 10x38, nine-hole hub, $40 each; Hubert nnn-nnn-nnnn (Bend OR)