28-inch slip scraper with metal handles, good condition, $25 obo; Ken nnn-nnn-nnnn (Wilsonville OR)
30-gallon oil Lubester, $75; Mark Willanger nnn-nnn-nnnn (Prescott WA)
Air compressor, Ingersoll Rand, vertical T-30, 60 gallon tank, two stage, 5 hp, 230V, single phase, heavy duty cast iron compressor pump, 15.1 CFM @175 PSI, very nice compressor, works great, less than half price of a new one, $750 obo; Jim Harry nnn-nnn-nnnn (Ellensburg WA)
All in one hydraulic unit, ran by PTO or belt pulley, was on a little crawler to lift blade, includes driveshaft with a belt pulley which drives pump with a reservoir tank and lever control all in one, comes with two short hydraulic rams about a foot long, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Allis Chalmers HD3 parts and repair manuals, best offer plus shipping; Phil nnn-nnn-nnnn (Redmond OR)
Allis Chalmers loader, tube type, from late 1950s or early 1960s, am told it should fit AC D-14, D-17 and other same ear tractors, has a trip bucket, do not have mounting frame, good condition, can email pictures, $350; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)
Aluminum loading ramp, 6’x4’, $150, call or text for pictures; Floyd nnn-nnn-nnnn (Albany OR)
Anchor chain, over 300 feet (football field), 4-1/2-inch links with cross bars, vintage, neat looking chain for yard art, $1000 takes all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Announcing a New Generation of Power brochure. This is from “Deere Day” 1960 in Dallas, TX introducing the “10” series New Generation tractors. It is an insert “pull-out” from John Deere Furrow Magazine, Special Edition September/October 1960. Rare, color, 16 pages with foldouts. 1010 thru 8010, two-page spreads on the 4010 and 8010. $60; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Be the big wheel in your neighborhood, one is seven feet and the other 10. Probably from a bandsaw mill, smaller one has never been used; Terry Wolbert nnn-nnn-nnnn (Yamhill OR)
Black walnuts, cracked, $4/lb., uncracked $3/lb., nuts are washed and clean; Joe Keith nnn-nnn-nnnn (Hermiston OR)
C clamps: five @ 2-1/4-inch opening, $25 each. Eight @ 3-1/2-inch opening, $35 each. One @ 3-1/2-inch L screw, $45. Two @ 4-3/4” opening, $40 each. Five @ 4-1/2-inch opening, $45 each. One @ 5-1/2-inch opening, $60. Five @ 6-3/4-inch opening, $75 each. Four @ 6-1/2-inch opening, $75 each. Two @ 6-3/4-inch opening, L screw, $85 each. Four @ 8-3/4-inch opening, $105 each. Two @ 12-1/2-inch opening, $150 each. Or all for $2380 obo; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Cargo lift, Waltco, fits two ton and bigger box truck, $350, call or text for pictures; Floyd nnn-nnn-nnnn (Albany OR)
Case 580 Construction King parts and repair manuals, best offer plus shipping; Phil nnn-nnn-nnnn (Redmond OR)
Caterpillar roller grease gun, older, no SN, still works, $80; Larry nnn-nnn-nnnn (Dexter OR)
Caterpillar track roller pump with the claw and some 85wt, $140; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Cultivator, Ferguson, 3pt, six-foot frame, has nine solid shanks, $150; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Cultivators, for a Farmall H, $125; Fred nnn-nnn-nnnn no text (Longbranch WA)
David Bradley wagon, good rubber, new paint, new removable sides, like new, $1250; Orval nnn-nnn-nnnn (Lebanon OR)
Dearborn saw buck, 3pt, with belt pulley for tractor, $200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Disc, John Deere RW, 12-foot, wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Disc: John Deere, 3pt, 7’-6”, fair condition, $250; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Egg cartons, 12 and 18 count, five for $1; Ken nnn-nnn-nnnn (Wilsonville OR)
Electric motors: NOS. two 1/2 hp, one phase, $99. Two 1 hp, one phase, 56 fr, C face, $139. Four 1 hp, three phase, 145T fr, $99. Two 1-1/2 hp three phase, 145T fr, $108. Three 3 hp three phase 182T fr, $142. One 5 hp three phase 184T fr, $168. One 10 hp three phase 215T fr, $246. One 20 hp three phase 256T fr, $486. One 15 hp three phase used, $275. One 40 hp three phase 240V, $477; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Equipment manuals: OB1: Murphy diesel instructions for operations, maintenance and repair of Murphy diesel engines, excellent, $20. OB2: Hydrapower integral power steering gear, HFB70, 42 page service manual, TRW Ross gear division, also HFB64 service manual, 46 page, HFB service manual, 36 page, also Char-Lynn steering column, 204-1001-003 thru 204-1038-003, parts information, 40 page, excellent, $40. OB3: GM diesel tune up, troubleshooting and maintenance tune up, 53 – tune up 71 inline, tune upV71, tune up 6-110, troubleshooting, preventative maintenance, excellent, $40. OB4: Michigan Model 75A tractor shovel parts manual, Clark equipment, slight soiled, $30. OB5: Motors flat rate and parts manual ,1962, excellent, $40. OB6: Sears 3pt hitch owner’s manual, model 917-253061, excellent, $5. OB7: Sears sickle bar mower, model 917-253120, very good, $10. OB8: Scoopmobile model LD-7 parts book, loose pages, good, $20. OB9: Jensales Farm Tractor manual and toys, cat #6002-A1, excellent, $10. OB10: Allison Torqm atic parts catalog, SA1039F, series 200-300, excellent, $300. OB11: Cummins J Seriese diesel engine operations and maintenance, bulletin number 983363-E, very good, $15. OB12: Cummins Automatic diesel engine O&M manual, USA and Canada, 1951, bulletin number 3379137-04, 8/81, excellent, $30. OB13: Toyota pickups and 4 Runner, pickups 1979-1995, 4 Runner 1984-1995, all compacts with a gasoline engine, excellent, $30. OB14: Cummins service topic, 1981 era, thick hard bound book, $40. OB15: Wisconsin heavy-duty air-cooled engines form MS-38-5, on ABN-CAN-AKN-BKN, model BKN for Gravely tractors, very good, $20. OB16: Wisconsin air cooled HD engines model VE4 and VF4, instruction book and parts list, issue MM265B, excellent, $30. OB17: Waukesha engines model 180-185-190 gas, publication 1500-D, operators manual, very good, $10. OB18: Allison series 200, 300 Torqmatic converters service manual, very good, $20. OB19: Allison fully automatic transmission parts catalog, MT series 1962-1966, SA 1146-A, 6/1/65, very goo d, $30. OB20: Allison Torqmatic transmission, series CRT 3321-3331, service manual, very good, $20; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Farm equipment: older equipment, new John Deere ground drive binder, Case threshing machine, McCormick-Deering 51 hillside combine with two headers on carts, 10 foot grain drill with steel wheels, four bottom plow with steel wheels, 12 foot cultivator, seven foot Western Wheeled Scraper with steel wheels, photos available; Bill nnn-nnn-nnnn (Lewiston ID)
Ford pickup bed trailer, mid 50s, two-inch ball, toolbox, pink slip, $750; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Hardbed New Holland 1045, excellent condition, powered by Ford six-cylinder, $2500 obo; John Robie nnn-nnn-nnnn (Milton CA)
Heat treating oven for small parts, Hevi-Duty brand, 220V, temperature control goes up to 1800F, inside dimensions are 5”x4”x8” deep, $50; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)
Hercules rock crusher, Tecumseh engine, $750; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Hobart welder, Handler 125, SN LC 486067, stock number 500487, $350; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Hydraulic fluid, surplus, case of 24 quarts, $18 per case; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Implements, John Deere, M and MT, one and two bottom, plow rear tool bar, rear angle blade; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International threshing machine, early 1940s, most belts and manuals, good rubber tires and it operates, photos and videos available, is a 28”-46” model, $1200; Wendell Newman nnn-nnn-nnnn (Carson NV)
John Deere New Generation era tractors brochure, rare French edition, models: 200, 310, 510, 710, 3020, 4020, 5020, December 1966 edition, $125; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
John Deere Patio Series Lawn and Garden sales brochure, rare, full color, Patio Red, Spruce Blue, April Yellow, Sunset Orange, of the 20 pages, nine pages exclusively covering Patio Series, also includes some traditional JD green, reviews models 70, 110, 112, 120, and 140, $75; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Koehler Signal Corporation generators, two available, four cylinders, one is 12VDC, been kept covered and out of the weather, cranks but hasn’t run in years. Second one is 110V, nearly complete cabinet, engine and generator are complete, but engine is stuck. $150 each or $250 for both obo; Tom Atwood nnn-nnn-nnnn (Kuna ID)
Land, six 10 acre parcels near Bonse AZ, off grid, all legal work completed, they are ready to be built on, one has a nice 28x50 Quonset plus well and septic, another has a well and septic installed, other four lots ready for whatever a buyer wants to do, neighbors are 100% solar; Robert nnn-nnn-nnnn (Benton City WA)
Lanz Bulldog Sales brochure, 16-inch x 20-inch, two-sided fold-out, large cut-a-way, suitable for wall hanging, rare, $65; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Lindex Co. 3pt set up for a John Deere 650 dozer, model JD323, SN H312, make offer; Fred nnn-nnn-nnnn no text (Longbranch WA)
Lionel train set, 1950s, received for Christmas at the age of 6 or 7, includes track, switches and tunnel. Locomotive #1130, Baby Ruth boxcar, gondola #6032, caboose #6037, original transformer and switch controller. Also includes Lionel 68 Executive Inspection Car, the red one. In January took the locomotive and #68 to a train show and both worked on test track, $200 for all; Mike nnn-nnn-nnnn (Puyallup WA)
Loaders: Dearborn, hydraulic dump, model 19, SN 17727, $350. Henry, model L100, SN 2AD553, 48-inch bucket, $750; Fred nnn-nnn-nnnn no text (Longbranch WA)
Log forks, Young, for a Terex 7251 or other wheel loaders, in working condition, $550; Paul Valentine nnn-nnn-nnnn (Marlin WA)
Logging tongs, old, still sharp, $150; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Meadows stone burr mill, 30-inch stones, pictures on request, $500; Wayne Slocum nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)
Meat, Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Metal Halide 400-watt fixtures, Multivolt, 24-inch square, horizontal mount, NOS in box, more than 10 available, $99 each; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Metal lathe, seven inch swing, 12 inch between centers, three and four jaw chucks, new 1/2 hp electric motor, tooling, $500 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)
Metal working tools: Ener Pac 75-ton pancake porta power ram, $450. 40-ton porta power ram, $200; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Miller 354MP with 70 series four drive roll feeder welding package, feeder and gun are new in box, looks new, great condition, $2800; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, reduced $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mower, John Deere 507, totally rebuilt several years ago and have not used it, new PTO shaft, new hydraulic lift cylinder, new blades that are hard faced, new hydraulic hoses, all safety shields in place, pull behind unit that requires little horsepower to operate, $900 and retiring so don’t need it anymore; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Orchard berm blower, well-built homemade unit with two cylinder Wisconsin engine, three wheel unit, light enough to tow behind three wheeler, tires are in good shape, engine runs very well and has been tuned up, $750, retiring and don’t need it anymore; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Orchard brush shredder, built by Perfect Brand Machine, 3pt, PTO driven, seven-foot-wide, needs work but all there, $450; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Outboard boat motor, Neptune model NOD-2A38, $35; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Parlor heater, 1920s vintage cast iron, porcelain wood or coal, each are unique and in fair to good condition, will sell individually or as a set, $100 each obo, photos on request; Tom Atwood nnn-nnn-nnnn (Kuna ID)
Petroleum product dispenser from a service station or repair shop, handle rotates nicely on the pump, has the tank cover and dip stick too, OPACO pump, tank is 22x10x32, labeled as inflammable, Sovasol cleaning solvent, General Petroleum Corp of California, $75; Mike nnn-nnn-nnnn (Puyallup WA)
Plant Jr. 474 seeder package, this is the pot of gold at the end of the rainbow, just a few made and even fewer remain, unit ready to mount on your Cub and ready to use, includes bars to hang and lift and drive chain, original seed hoppers and lots of seed plates, field row markers, everything to seed one to four rows, includes rear wheel spacer to widen the Cub, International original equipment, don’t miss this one, total package $3150 cash; Mike nnn-nnn-nnnn (Puyallup WA)
Plow coulters: pair of matched 15-inch diameter, 1-1/2-inch shaft, casting #S590. One that is 15 inch with 1-3/8-inch shaft and casting #B287. One that is 12 inch with 1-1/4-inch shaft, no identification. Open to offers; Frank nnn-nnn-nnnn (Morgan Hill CA)
Plow: John Deere pull type, 2-14, on rubber, $300 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Plows: Dearborn two bottom, model 10-1, SN 56860, $300. John Deere single bottom on rubber, SN 593, make offer. JD, 3pt, Category 1, two bottom, A0030, SN 010209A, $350; Fred nnn-nnn-nnnn no text (Longbranch WA)
Plows: McCormick 4-16-inch, heavy plow, trip lift, on rubber screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Radial arm saw, Sears, 10 inch, also a bandsaw, $200 for both; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Railroad flat car, 53-foot-long, 9’3” wide, good for bridge or whatever, $5000 obo; John Spender nnn-nnn-nnnn (Hermiston OR)
Red mesh 50 and 25 lb. onion sacks, $.15 each; Ken nnn-nnn-nnnn (Wilsonville OR)
Rock crusher, Allis Chalmers/Gates Iron Company, six-inch intake, made in early 1900s, $1250, call or text for pictures; Floyd nnn-nnn-nnnn (Albany OR)
ROPS canopy off a 2500 series B International industrial tractor, $300; Fred nnn-nnn-nnnn no text (Longbranch WA)
Seaman Triple Tiller, don’t know much about it, it is a rototiller pulled by a tractor or truck and has a Waukesha engine on it, not running; Jesse Busack nnn-nnn-nnnn (Eagle ID)
Shelf supports for tear dop steel shelves, don’t have any ends/uprights, make offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Shopsmith Mark 5, green one, have many accessories to use as a drill press, wood lathe, disc sander, vertical saw, table saw, great shape, been in storage for many years, $350; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Singer Feather Weight sewing machine, in nice carrying case, $550 (corrected price); Joe Keith nnn-nnn-nnnn (Hermiston OR)
Spring tooth, old, not adjustable, six-foot-wide, says AW Stevens Auburn NY, looks usable, $75; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Tank chassis, M-56 Scorpion, total of five units, all with 402 cubic inch fuel injected engines, Allison automatic transmissions, drive with a steering wheel, brake and gas pedal, no gun parts, none drivable, two for runners and three for parts, light weight, 4200 lbs., 98 inches wide at track, located near Ft. Lewis WA (Tacoma), one extra engine and transmission, manuals and spare parts, $12000 for all; Bradley nnn-nnn-nnnn (McKenna WA)
Taylor rock crusher with four-cylinder Ford engine, $850; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Tractor manuals: MT4: IT Allis Chalmers shop manual, B-C-CA-G-RC-WC WD-WD45-WD-45 manual, excellent, $20. MT5: IT Allis Chalmers shop manual AC10, models D10-D12, 20 pages, excellent, $15. MT6: Allis Chalmers shop manual AC8, models D17-D17D, 44 pages, excellent, $15. MT7: Allis Chalmers model WD45 operating instructions and repair parts illustrations form TM85B, 77 pages, slight used, $30. MT8: Rhino 300 rear mounted blade, very good, 10. MT9: Bushhog RZ60 rotary cutter operations manual, Razorback, very good, $10. MT10: Rhino 8E5, rotary mower, slight soiled, $10. MT11: Rhino LR rear mounted blade, operator’s manual, $10. MT13: Kubota model BF900 flat rate schedule for Kubota front loader, excellent, $10. MT14: Kubota models B5100BD, B6100BD, B7500ED, flat rate schedule, excellent, $10; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Trash pump, Homelite, two three inch and one four inch, with suction hoses, package price, $600; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Vidmar eight drawer cabinet full of threading dies and die nuts, right and left hand, $3500 obo; Bernie nnn-nnn-nnnn (Santa Rosa CA)
Vintage ceiling light fixture, light up your favorite display area with these classic fixtures, search “vintage Holophane 3 piece ceiling lights”, hangs about 11.5 inches from the ceiling and about 12 inches in diameter, have eight total to be sold together, $600 cash; Mike nnn-nnn-nnnn (Puyallup WA)
Weiss McNair pruning tower, 14 foot, new 16 hp Briggs and Stratton engine, new rebuilt hydraulic motor, many other new parts, retiring and don’t need it anymore, $3250 obo; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Wheel weights for 16-inch wheels, weights are in halves, two per wheel, $200; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Wind generator, Allied Electric, model 16, 1600 watts, 40 volts DC, with control panel, three six-foot wooden blades, 1920-1930s, $1850; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Wood stove, antique, trash burner, made by Frigidaire, $300; Joe Keith nnn-nnn-nnnn (Hermiston OR)