Allis Chalmers 6B dozer, 1957, Carco winch, manual angle blade, canopy, four-cylinder diesel, turns and runs good, ready to work, $6500 obo; Robert Doud nnn-nnn-nnnn or xxxx@xxxx.xxx (Chiloquin OR)
Allis Chalmers B parts including adjustable wide front axle; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Best combine sickle guards, have several, $5 each plus shipping; David Ruark nnn-nnn-nnnn (Pomeroy WA)
Case 411B, 1957, with Case-O-Matic, restored approximately seven years ago including new paint and new front tires, 14.9-28 rears with 70-80% tread, two remotes, starts right up, used as a parade tractor, needs a couple of minor repairs, $2500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)
Case 580 Super E with extended hoe, two buckets and four-way Gannon bucket, John Deere controls, $14000; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Case 830, 1966, runs good, brand new seat, 3pt hitch, needs a head gasket; Matt Little nnn-nnn-nnnn (Harrison ID)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC, 1934, restored in 2010 with all new rubber and paint, starts on second or third pull, lots of compression, runs great, lift pump, needs brake work, needs to be seen, $3000 tractor, but will sacrifice at $1500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)
Case CK470 backhoe, rebuilt pump and bucket cylinder, needs work on outriggers and extension arm, can deliver to the right party; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case DC, 1944, adjustable front end, restored eight years ago with new paint and rubber on all four wheels, looks great, runs and drives good, needs a few minor repairs, $1500; Lonnie Sisson nnn-nnn-nnnn (Rohnert Park CA)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics and Eagle hitch, runs, needs some tinkering, $550; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DCs, two tractors, both unrestored, one gas, 1951, SN 5515157 DC, engine stuck, other propane, 1952, SN 5617735 DC, engine free with partial restoration started with functional parts restored, ready to start, both are wheeled with functional tires, $1800 for both; Lorry Dunning nnn-nnn-nnnn or xxxx@xxxx.xxx (Davis CA)
Case S wide front axle with wishbone, front wheels, drag link, $125; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case VA parts and adjustable wide front axle; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Case VA, 1948?, no SN tag, radiator made 11/1947, original owner stated it is a 1948, decaled VAC incorrectly, older restoration with not enough paint, tin work is very good, runs good, new tires on front, good rear tires. Also have a Case mower of the correct vintage if wanted. $900 for the tractor, $25 for the mower; Don Zimmerman nnn-nnn-nnnn or xxxx@xxxx.xxx (Hermiston OR)
Case VAC-11, 1953, SN 5750457, mechanically and cosmetically restored in 2019, tires 80%, $2900; Roy Wilber nnn-nnn-nnnn (Boring OR)
Case/David Brown 990, runs fine, rebuilt 3pt hydraulics, draft control valve and remote take off, new clutch, needs power steering work, will deliver to right party, $3000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Caterpillar 10 parts, pile of miscellaneous parts, few Cat 20 and 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Earthmaster model C, 1950, restored, made in Burbank CA, came with plow, box scraper, spring tooth and disc, $5200; Les Alexander nnn-nnn-nnnn (Alturas CA)
Farmall 350, 1958, diesel, not running, not stuck, missing radiator, grille, pan seat and one diesel emblem, single front wheel, rear tires are usable; Ken nnn-nnn-nnnn landline with no voicemail (Portland OR)
Farmall A to 450 sheet metal plus miscellaneous parts. Farmall H rear skeleton wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall AV, 1947, high crop, rare collector, parade tractor, just rebuilt engine, new electrical system, new Firestone tires, quick mount safety step, looks, runs and drives like new, runs as good or better than it did 73 years ago at the factory in Chicago, all trades considered, serious buyers email for pictures; Jake nnn-nnn-nnnn or xxxx@xxxx.xxx (Adrian OR)
Farmall C, complete with hydraulics, starter, generator, carburetor, etc., but likely stuck, $600. Great for restoration, yard art, or parts. Email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall Cub parts: one front wheel, $10. Two rear rims, $45 each. Two fenders, $40 each. One hood/gas tank, $40. One front axle, $50. One radiator, $30. One dash, instruments, $25; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Cub, 1948, good rubber, belly blade, good condition, new paint, $2200; Orval nnn-nnn-nnnn (Lebanon OR)
Farmall Cub, 1950, SN 103634, painted white as it was a dealer demonstrate tractor, $2500; Jim nnn-nnn-nnnn (Butte MT)
Ferguson TE 3411, one with aluminum transmission and casing, no starter, will trader for old double barrel shotgun; Edward Barbosa nnn-nnn-nnnn (Morgan Hill CA)
Ford 2N or 8N original top link, adjustable, nice condition, $135 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Ford 2N/8N equipment package, proof meter, swinging drawbar, scalloped rear rims, extended steering column, engine has 90 over pistons, four ring high dome, power piston package, new tires, new sheet metal, 3pt rear scoop that is reversible, five row 3pt cultivator, rebuilt 3pt six foot disc, six foot 3pt back blade, tractor also has a front grille guard, side air breather with canister, less than two hours on rebuilt engine, $10000; Robert nnn-nnn-nnnn (Benton City WA)
Ford 420, 1977, with loader and Gannon scraper, new bucket cylinders, diesel engine, new rear tires, serviceable 11/16 fronts, $5000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 8N, 1949, excellent tires and tin, 12V, new plugs, carburetor, lights, recent restoration, chains and plow, $2400; Frank nnn-nnn-nnnn (Manning OR)
Ford 8N, tractor, very nice, rebuilt motor, new paint, good tires, 12V, $2750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford Golden Jubilee, 1953, runs good, new fuel tank and grille, factory front end loader, pictures available, $3400; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Ford N series factory bolt on PTO adapter for small shaft to standard size, $30; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Fordson tractor parts including really nice (desert) fenders, $450 obo. Nice steel rear wheels with grousers, $375/pair obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Fordsons, two tractors, unrestored, engines stuck, one 1919, partial SN 4013?, one 1927, SN 734707, $1400 for both tractors; Lorry Dunning nnn-nnn-nnnn or xxxx@xxxx.xxx (Davis CA)
Gibson Tug, disassembled, has all the name plates, spare engine, $5200; Buck Evans nnn-nnn-nnnn (Greenville IL)
Injector pumps, Roosa Master Model 450128, $500 obo; Phil nnn-nnn-nnnn (Redmond OR)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 660, $1700; Keith Busack nnn-nnn-nnnn (Longview WA)
International TD9 dozer, has not run in many years, ran when parked, good eight-foot straight blade, 22-inch tracks, undercarriage looks pretty good, though not an expert, can send pictures; Jay Spenst nnn-nnn-nnnn or xxxx@xxxx.xxx (Ephrata WA)
John Deer 420C, five roller long track crawler, rare model, heavy duty hydraulic tilt blade, manual angle and hard to find 3pt, no top link, good undercarriage, good sheet metal, canopy, reverser does not work but main transmission works great both reverse and forward gears, has a recent main clutch, steers both ways, this is a very nice hard to find machine, call for info, $7500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 2010, 1961, row crop, parts or restorable, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere 3020, 1966, SN T113R086427R, 4.4L diesel, 70 hp, synchro transmission, two new batteries, new seat, radiator flushed and cleaned, runs great, showroom clean, $15000 obo; Ron nnn-nnn-nnnn (Amity OR)
John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
John Deere 40U, new front tries, new muffler, new oil seal on 3pt. control, $2750; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 420 hood and nose piece, some rust and dents, $200 obo for the pair; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere 520 hood, $100; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 5410 weights, six weights, 100 lbs. each, mounting brackets, $600; Ron nnn-nnn-nnnn (Modesto CA)
John Deere 620 gasket set less carburetor gasket, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 70, diesel, runs, has wide front end, converted to electric start, $3000; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere 720 nose piece, includes grille, needs paint; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere A, 1936, unstyled, not running, best offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere A, 1940, SN 493887, parts tractor, rough, missing cylinder head, carburetor, one piston, manifolds, front grilles, one rear wheel rusted out, can email pictures, $500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AN, 1939, restored, good runner, $2000; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere AN, 1951, good tires, runs well, $1250; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere AR-AO unstyled fuel tank, no leaks, $50; Les Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere B, 1936, on factory round spokes, runs and drives, $2750; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1940, SN 89882, fair-good sheet metal, electric start, rockshaft, not running, needs tires, missing battery cover, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere B, 1943, tricycle, nice tin, runs well, $1500; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1951, parts or restorable, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere BN, 1952, early restoration, starts and runs good, good tires, good tag, $2500; John Shierman nnn-nnn-nnnn (Battle Ground WA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2350; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere L, 1939, older restoration, hard to find one with all original parts which includes: Firestone original tread tires, starting crank, tool tray, seat, driveline cover, drawbar rollers, throttle linkage, fenders (with no dents), radiator (nice, no repairs), steering wheel, belt pulley!!, foot rest pans with brake locks, etc., has excellent manifold that has no cracks or repairs, brakes work well, starts and runs good, has hand painted lettering, very nice little tractor, could use cleaning and touch up paint to make it pristine, but looks and shows great as is, ready to show or parade, price reduced to $3200 obo; Jim Harry nnn-nnn-nnnn or xxxx@xxxx.xxx (Ellensburg WA)
John Deere LA, 1945, SN 11102, new paint, decals and rubber, photos available, $3500 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere M, 1948s, have two, will sell together, SN 18412 and 22768, parts tractors, partially disassembled, includes parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere parts: H flywheel, hand start, $125. 1951 JD B head, completely rebuilt, $350. 1951 B intake valves, new in box, B2863R, set of two, $40. 1951 B exhaust valves, new in box, B2503R, set of two, $40. 420U decal set from Jorde, $100; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere parts: lots of miscellaneous for two cylinders crawlers, engine parts, gears, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere tractors: 1949 M, 1949 B, 1947 pan seat G, delivery available at reasonable rate; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
Massey Ferguson 202, 1962, industrial model, Gannon on back, no loader, delivery available at reasonable rate; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
Massey Ferguson single front wheels, fully mounted, includes mounting bolts, have two, both have good tires, for 1100 series, $250 each or trade; Jake nnn-nnn-nnnn (Adrian OR)
Massey Harris 30G, row crop, not running, fair-good sheet metal, 540 PTO, hydraulics, missing one rear tire and brake parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
McCormick Deering 15-30, 1933, on steel, runs great, $9550; Les Alexander nnn-nnn-nnnn (Alturas CA)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering WK-40, full steel, original engine free, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline 5 Star, 1957, sheet metal rough, 3pt, 540 PTO, Amplitorque, tricycle front, 15.5-38 rears, need to be replaced, can email pictures, $3400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UBN, 1953, SN 06000140, propane, fuel tank needs service, good sheet metal, hydraulics, 540 PTO, Schwartz wide front, was running when parked, very rare tractor, very collectible, only 241 built, can email pictures, $4500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTS, 1949, runs good, has wheel weights, straight tin, $1500; Matt Little nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Minneapolis Moline ZAN, 1952, SN 00800561, complete tractor, straight sheet metal, hydraulics, 540 PTO, Schwartz wide front, 13.6-38 tires, engine is loose, has red nose front, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAU, 1952, SN 00614462, complete tractor, straight sheet metal, was running when parked, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline, early 50s, SN 000604785Z, runs good, tricycle, front end loader, power steering assist, new radiator, $3200; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Oliver 60, 1948, rare row crop with factory wide front end, 98% complete including all side curtains and other tin, unrestored but not stuck, easy restoration project, $3200, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 70, tricycle, Warn winch on back, 12V, ran when parked 12 years ag in the shed, engine not stuck, tires fair and still holding air, $500 obo; Ron nnn-nnn-nnnn (Amity OR)
Oliver 880, diesel, row crop with wide front axle, PTO, hydraulics, 3pt, power steering, good tires; Ken nnn-nnn-nnnn (Eugene OR)
Oliver 88s, two rare “old style” Oliver 88 tractors, one is row crop and other is standard tread, neither are restored but pretty complete, one is a 1947 and the other is a 1948, both have belt pulley and live PTO, standard tread has an early style Oliver live hydraulic system, both are very restorable; Ken nnn-nnn-nnnn (Eugene OR)
Oliver OC3 and HG crawler parts, lots of miscellaneous, engine parts, sheet metal, rollers, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Oliver/Cletrac AD, four units, two with dozers, don’t run, $1000 obo; Warren Berg nnn-nnn-nnnn (North Highlands CA)
Parting out Allis Monarch 35 or K; Buck Evans nnn-nnn-nnnn (Greenville IL)
Tire: brand new, 14.9-28, $225; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Tires, Firestone 7:50/22, NOS, never mounted, new tubes included, $500 for the pair; Larry Schwartz nnn-nnn-nnnn (Centralia WA)
Tractor collection for sale: two John Deeres, LA and H, two Internationals (Cubs), and one Allis Chalmers. Also have Moline thresher, JD potato planter and grain drill, look for “Tractors for sale” on Bend OR craigslist, priced from $3000 to $5500; Tom nnn-nnn-nnnn (Madras OR)
Turf tires: two 13.6x16 mounted on John Deere six-hole compact tractor wheels. Two 25 8.50x14 unmounted, all with 90% tread, $650; John Shierman nnn-nnn-nnnn (Battle Ground WA)
Wheel weights off 580 Case Construction King, $200 obo; Phil nnn-nnn-nnnn (Redmond OR)
Wheels, two, 8x24 waffle type, good shape, $400; Vern Fought nnn-nnn-nnnn (Exeter CA)
Yanmar 1610, loader, new tires, one new rim, rebuilt injector pump, $4000; Phil Wall nnn-nnn-nnnn (Enumclaw WA)