30-gallon oil lubester, nice condition, $75; Mark Willanger nnn-nnn-nnnn (Prescott WA)
Air compressor, commercial Ingersoll Rand, vertical T30, 60 gallon tank, two stage, 5 hp, 230V, single phase, heavy duty cast iron compressor pump, 15.1 CFM @175 PSI, very nice compressor, looks like new, works great, less than 1/2 price of a new one, priced reduced to $650 obo; Jim Harry nnn-nnn-nnnn or xxxx@xxxx.xxx (Ellensburg WA)
Allis Chalmers HD3 parts and repair manuals, best offer plus shipping; Phil nnn-nnn-nnnn (Redmond OR)
Allis Chalmers loader, tube type, from late 1950s or early 1960s, am told it should fit AC D-14, D-17 and other same ear tractors, has a trip bucket, do not have mounting frame, good condition, can email pictures, $350; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)
Anchor chain, over 300 feet (football field length), 4-1/2-inch links with cross bars, neat looking chain for yard art, etc., $1000 takes all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Announcing a New Generation of Power brochure. This is from “Deere Day” 1960 in Dallas, TX introducing the “10” series New Generation tractors. It is an insert “pull-out” from John Deere Furrow Magazine, Special Edition September/October 1960. Rare, color, 16 pages with foldouts. 1010 thru 8010, two-page spreads on the 4010 and 8010. $60; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Backhoe unit off midsize Gehl skid steer, was adapted to a Case 1845 skid steer, been sitting for a few years, but very usable, 16-inch bucket, heavy duty looking unit, $2400; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Baker Hamilton tractor seat, spring mounted on a disc, photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Be the big wheel in your neighborhood, one is seven feet and the other 10. Probably from a bandsaw mill, smaller one has never been used; Terry Wolbert nnn-nnn-nnnn (Yamhill OR)
Block/pulleys, old, several, off ships and from logging, some well over 100 lbs., sell one or all, starting at $100 each and up; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Book: Old Tractors and the Men Who Love Them, Roger Welch, $10; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Case 580 Construction King parts and repair manuals, best offer plus shipping; Phil nnn-nnn-nnnn (Redmond OR)
Cast iron hacksaw with pulley and several new blades, on two cast iron wheels, cart is oak, $175 or reasonable offer; Bob Johnson nnn-nnn-nnnn (Cedarville CA)
Caterpillar roller grease gun, older, no SN, still works, $80; Larry nnn-nnn-nnnn (Dexter OR)
Caterpillar Service manuals for 66AD9 testing and adjusting, powershift transmission, DW10 scraper, sales magazine for Cat 22, D1700, $10-$40. Cat tax for $20. Huge box of Cat O rings, $25. Or obo. Hasler handheld tac, $40. Cat seal installer 7-1/4 inch, $20. Seals for D47U rollers, $2.50. Rebuilt starter for Detroit 92, best offer; Jim Ronsse nnn-nnn-nnnn or xxxx@xxxx.xxx (Chicago Park CA)
Control unit for early double drum Le Tourneau for Caterpillar Sixty, $450 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
David Bradley wagon, good rubber, new paint, new removable sides, like new, $1250; Orval nnn-nnn-nnnn (Lebanon OR)
Deere tractor seat, spring mounted on a disc, photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Disc, John Deere RW, 12-foot, wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Disc: John Deere, 3pt, 7’-6”, fair condition, $250; Sean Moylan nnn-nnn-nnnn (Woodland CA)
DR mower, 344cc Briggs and Stratton motor, runs good, low hours, new transmission, spare transmission included, $1650; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Electric motors: NOS. two 1/2 hp, one phase, $99. Two 1 hp, one phase, 56 fr, C face, $139. Four 1 hp, three phase, 145T fr, $99. Two 1-1/2 hp three phase, 145T fr, $108. Three 3 hp three phase 182T fr, $142. One 5 hp three phase 184T fr, $168. One 10 hp three phase 215T fr, $246. One 20 hp three phase 256T fr, $486. One 15 hp three phase used, $275. One 40 hp three phase 240V, $477; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Equipment manuals: OB1: Murphy diesel instructions for operations, maintenance and repair of Murphy diesel engines, excellent, $20. OB2: Hydrapower integral power steering gear, HFB70, 42 page service manual, TRW Ross gear division, also HFB64 service manual, 46 page, HFB service manual, 36 page, also Char-Lynn steering column, 204-1001-003 thru 204-1038-003, parts information, 40 page, excellent, $40. OB3: GM diesel tune up, troubleshooting and maintenance tune up, 53 – tune up 71 inline, tune upV71, tune up 6-110, troubleshooting, preventative maintenance, excellent, $40. OB4: Michigan Model 75A tractor shovel parts manual, Clark equipment, slight soiled, $30. OB5: Motors flat rate and parts manual ,1962, excellent, $40. OB6: Sears 3pt hitch owner’s manual, model 917-253061, excellent, $5. OB7: Sears sickle bar mower, model 917-253120, very good, $10. OB8: Scoopmobile model LD-7 parts book, loose pages, good, $20. OB9: Jensales Farm Tractor manual and toys, cat #6002-A1, excellent, $10. OB10: Allison Torqm atic parts catalog, SA1039F, series 200-300, excellent, $300. OB11: Cummins J Seriese diesel engine operations and maintenance, bulletin number 983363-E, very good, $15. OB12: Cummins Automatic diesel engine O&M manual, USA and Canada, 1951, bulletin number 3379137-04, 8/81, excellent, $30. OB13: Toyota pickups and 4 Runner, pickups 1979-1995, 4 Runner 1984-1995, all compacts with a gasoline engine, excellent, $30. OB14: Cummins service topic, 1981 era, thick hard bound book, $40. OB15: Wisconsin heavy-duty air-cooled engines form MS-38-5, on ABN-CAN-AKN-BKN, model BKN for Gravely tractors, very good, $20. OB16: Wisconsin air cooled HD engines model VE4 and VF4, instruction book and parts list, issue MM265B, excellent, $30. OB17: Waukesha engines model 180-185-190 gas, publication 1500-D, operators manual, very good, $10. OB18: Allison series 200, 300 Torqmatic converters service manual, very good, $20. OB19: Allison fully automatic transmission parts catalog, MT series 1962-1966, SA 1146-A, 6/1/65, very goo d, $30. OB20: Allison Torqmatic transmission, series CRT 3321-3331, service manual, very good, $20; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Experimental bush plane, no more flying for this boy, fuselage is covered, has mounts for skis or floats, zero time stand tested engine, spend the winter finishing this baby and be off and flying come spring; Bruce nnn-nnn-nnnn (Redmond OR)
Fairbanks Morse generator, 1946, two-cylinder water cooled, 2250 watts, 36 watts, 32V electric start, runs perfectly, Onan built for Fairbanks Morse, $1500 obo; James Treadwell nnn-nnn-nnnn (Riverside CA)
Farm equipment: older equipment, new John Deere ground drive binder, Case threshing machine, McCormick-Deering 51 hillside combine with two headers on carts, 10 foot grain drill with steel wheels, four bottom plow with steel wheels, 12 foot cultivator, seven foot Western Wheeled Scraper with steel wheels, photos available; Bill nnn-nnn-nnnn (Lewiston ID)
Fobs: Sullivan Machinery/The Sulliscrew, $25. Insley, $28. Warner & Swasey, Gradall, $35. Dart, $20. Gar-Bro, $25. Lasting Bonafide Service, LB Smith, $20. Worthington Bluebrute Hand Held Rock Drills, $30. International with truck and loader, $25. Caterpillar with loader, $25. Lull, $18. Wabco, $18. Michigan with loader, $25. Gardner-Denver Jackhammer, $28. Cadillac, 1933, $30. Can provide additional information on company inscriptions on back; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Ford pickup bed trailer, mid 50s, two-inch ball, toolbox, pink slip, $750; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Fordson rare aftermarket double drum side mounted winch for a dragline setup, $450 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Gas pump, Wayne 70, missing some parts, but pretty straight, good start for restoration or shop display. 1960s or early 70s Bennett, all there, use or display; Bill Weatherby nnn-nnn-nnnn (Lewiston ID)
Generator, AC, 6.5 kva, 3 phase, 208-240V and 120V, 1800 rpm, Continental four cylinder powered, hood enclosed, trailer mounted with good tires, very clean and low hours, starts and runs nicely, $2000 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Grape crusher, Touluouse and Del Rieux, antique, use for wine making or cider or yard art, crush surface area at the base of the hopper is 11x20 inches, made in San Francisco at 620 Commercial St. (in casting), photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Hardbed New Holland 1045, excellent condition, powered by Ford six-cylinder, $2500 obo; John Robie nnn-nnn-nnnn (Milton CA)
Hercules rock crusher, Tecumseh engine, $750; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Hobart welder, Handler 125, SN LC 486067, stock number 500487, $350; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Huge black walnut tree, must take down, best offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Hydraulic cylinders, 12’6” long from old loader, $150; Keith Busack nnn-nnn-nnnn (Longview WA)
Hydraulic fluid, surplus, case of 24 quarts, $18 per case; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Hydraulic unit, all in one, ran by PTO or belt pulley, was on a little crawler to lift the blade, includes a driveshaft with a belt pulley which drives a pump with a reservoir tank and lever control all in one, comes with two short hydraulic rams about a foot long, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Implements, John Deere, M and MT, one and two bottom, plow rear tool bar, rear angle blade; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International threshing machine, early 1940s, most belts and manuals, good rubber tires and it operates, photos and videos available, is a 28”-46” model, $1200; Wendell Newman nnn-nnn-nnnn (Carson NV)
John Deere “Legacy” 2010 calendar, match to 2021, color, excellent condition, 12”x12”, Voyageur Press, if interested can tell models illustrated, $12; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
John Deere anvil, 5-1/2 inches long, $50; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere New Generation era tractors brochure, rare French edition, models: 200, 310, 510, 710, 3020, 4020, 5020, December 1966 edition, $125; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
John Deere Patio Series Lawn and Garden sales brochure, rare, full color, Patio Red, Spruce Blue, April Yellow, Sunset Orange, of the 20 pages, nine pages exclusively covering Patio Series, also includes some traditional JD green, reviews models 70, 110, 112, 120, and 140, $75; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Koehler Signal Corporation generators, two available, four cylinders, one is 12VDC, been kept covered and out of the weather, cranks but hasn’t run in years. Second one is 110V, nearly complete cabinet, engine and generator are complete, but engine is stuck. $150 each or $250 for both obo; Tom Atwood nnn-nnn-nnnn (Kuna ID)
Land, six 10 acre parcels near Bonse AZ, off grid, all legal work completed, they are ready to be built on, one has a nice 28x50 Quonset plus well and septic, another has a well and septic installed, other four lots ready for whatever a buyer wants to do, neighbors are 100% solar; Robert nnn-nnn-nnnn (Benton City WA)
Lanz Bulldog Sales brochure, 16-inch x 20-inch, two-sided fold-out, large cut-a-way, suitable for wall hanging, rare, $65; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Log splitter and trailer, heavy duty splitter, great for a do-it-yourself wood gathering, imagine splitting up that pile of wood that takes you months in just an afternoon, take it to the woods with you and split as you go, easier to handle when it is split, not so hard on the back stacking in trailer and unloading; Bruce nnn-nnn-nnnn (Redmond OR)
Magneto books: Fairbanks Morse, Fundamentals of Magneto Ignition, $28. International Magnetos Service Manual for International F-4, F-6, E4A, H-1, Wico H, AH, EK, AP and Splitdorf (Dixie and Aero), $32; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Meadows stone burr mill, 30-inch stones, pictures on request, $500; Wayne Slocum nnn-nnn-nnnn or xxxx@xxxx.xxx (Chico CA)
Meat, Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Metal Halide 400-watt fixtures, Multivolt, 24-inch square, horizontal mount, NOS in box, more than 10 available, $99 each; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Metal lathe, seven-inch swing, 12 inch between centers, three and four jaw chucks, new 1/2 hp electric motor, tooling, $500 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)
Metal reader board, large, lighted, flashing arrow, all lights work, $400, can send video. Also have several tractor seats, $35 each; Bill Weatherby nnn-nnn-nnnn (Lewiston ID)
Mill circular saw, 48 inch, no teeth, no rust, stored inside, $75; Mike nnn-nnn-nnnn (Puyallup WA)
Miller 354MP with 70 series four drive roll feeder welding package, feeder and gun are new in box, looks new, great condition, $2800; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, reduced $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mower, John Deere 507, totally rebuilt several years ago and have not used it, new PTO shaft, new hydraulic lift cylinder, new blades that are hard faced, new hydraulic hoses, all safety shields in place, pull behind unit that requires little horsepower to operate, $900 and retiring so don’t need it anymore; Sean Moylan nnn-nnn-nnnn (Woodland CA)
New Holland, First 100 years, 1895-1995, equipment for early hay, stone crusher, baler, forage harvester, combines, Fiat, Ford/New Holland transition, Versatile, magazine/mailer form, color, 34 pages, $12; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Orchard berm blower, well-built homemade unit with two cylinder Wisconsin engine, three wheel unit, light enough to tow behind three wheeler, tires are in good shape, engine runs very well and has been tuned up, $750, retiring and don’t need it anymore; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Orchard brush shredder, built by Perfect Brand Machine, 3pt, PTO driven, seven-foot-wide, needs work but all there, $450; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Outboard boat motor, Neptune model NOD-2A38, $35; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Parlor heater, 1920s vintage cast iron, porcelain wood or coal, each are unique and in fair to good condition, will sell individually or as a set, $100 each obo, photos on request; Tom Atwood nnn-nnn-nnnn (Kuna ID)
Plow: John Deere F120, 3pt, 3-16s, good shape, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Plows: McCormick 4-16-inch, heavy plow, trip lift, on rubber screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Radial arm saw, Sears, 10 inch, also a bandsaw, $200 for both; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Railroad flat car, 53-foot-long, 9’3” wide, good for bridge or whatever, $5000 obo; John Spender nnn-nnn-nnnn (Hermiston OR)
Rotovator, 3pt, $400; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Sailboat winches, Anderson stainless steel two speed self-tending, new in box, never used, one 40 ST, $450. One 28 ST $325. Photos on request; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Sandblaster, 200 lb. commercial unit, complete with 25 feet of high capacity hose, $300 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Shelf supports for tear dop steel shelves, don’t have any ends/uprights, make offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Shelfing unit, 87 inches long, 70 inches tall, 24 inches wide, 24 bins that are 10 inch by 11 inch by 17 inches, 12 each side with shelf under it made out of old boards, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Singer 331K5 leather sewing machine, $500; Keith Busack nnn-nnn-nnnn (Longview WA)
Singer Feather Weight sewing machine, in nice carrying case, $550 (corrected price); Joe Keith nnn-nnn-nnnn (Hermiston OR)
Stearman airplane, retired from flying and need to get the plane to a new home, need a project for those long winter nights and boring days at home? Love the bark and growl of a round engine and the graceful old-time biplane? Plane is in cover stage, multiple parts collected over the years, all go with the project; Bruce nnn-nnn-nnnn (Redmond OR)
Table saw, 10-inch, older Sears unit, on a stand with casters, cast iron table with two wings, fence and miter, one hp motor, nice shape, $200 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Tank, steel, riveted, 20-inch-wide, 60-inch-high, $50. Also, steel riveted tank on trailer, has several threaded openings for pipe fittings, $200, email for pictures; Paul nnn-nnn-nnnn or xxxx@xxxx.xxx (Cochise AZ)
Taylor rock crusher with four-cylinder Ford engine, $850; Aaron Gully nnn-nnn-nnnn (Anderson CA)
Toro front blade, $175; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Toro rotovator drive shaft, $275; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Tractor manuals: MT4: IT Allis Chalmers shop manual, B-C-CA-G-RC-WC WD-WD45-WD-45 manual, excellent, $20. MT5: IT Allis Chalmers shop manual AC10, models D10-D12, 20 pages, excellent, $15. MT6: Allis Chalmers shop manual AC8, models D17-D17D, 44 pages, excellent, $15. MT7: Allis Chalmers model WD45 operating instructions and repair parts illustrations form TM85B, 77 pages, slight used, $30. MT8: Rhino 300 rear mounted blade, very good, 10. MT9: Bushhog RZ60 rotary cutter operations manual, Razorback, very good, $10. MT10: Rhino 8E5, rotary mower, slight soiled, $10. MT11: Rhino LR rear mounted blade, operator’s manual, $10. MT13: Kubota model BF900 flat rate schedule for Kubota front loader, excellent, $10. MT14: Kubota models B5100BD, B6100BD, B7500ED, flat rate schedule, excellent, $10; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Trailer, single axle fifth wheel, 12’x5-1/2’, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Walnuts, new crop, in shell, $2/lb. FOB ranch; Ron nnn-nnn-nnnn (Modesto CA)
Weights, Ford suitcase, 10-40 kg, with mounting bracket, $800, email for pictures; Paul nnn-nnn-nnnn or xxxx@xxxx.xxx (Cochise AZ)
Weiss McNair pruning tower, 14 foot, new 16 hp Briggs and Stratton engine, new rebuilt hydraulic motor, many other new parts, retiring and don’t need it anymore, $3250 obo; Sean Moylan nnn-nnn-nnnn (Woodland CA)
Wind generator, Allied Electric, model 16, 1600 watts, 40 volts DC, with control panel, three six-foot wooden blades, 1920-1930s, $1850; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Wood block and tackle unit, displayed in our fruit stand for years, very nice rope and pulleys, $95; Mike nnn-nnn-nnnn (Puyallup WA)
WWII amphibious jeep capstan Braden winch, photos on request, $500; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Yard art eight-foot fertilizer spreader, has a wheel and tire on each end with a bin in between, $75; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)