Allis Chalmers B parts including adjustable wide front axle; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Allis Chalmers G, running condition, unrestored, $3150; Todd nnn-nnn-nnnn (Placerville CA)
Allis Chalmers WD and WD45, both for $400; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
BF Avery, engine in shop, stuck, $200; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)
Case 350 dozer, diesel, with six way hydraulic blade, has hydraulic 3pt in rear, PTO, shuttle shift, undercarriage very good, engine smokes a little and has blowby but runs strong and sounds good, has canopy, good oil pressure, clean looking dozer, 1973 model, as is, $8900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case 580 Super E with extended hoe, two buckets and four-way Gannon bucket, John Deere controls, $14000; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Case 830, 1966, runs good, brand new seat, 3pt hitch, needs a head gasket; Matt Little nnn-nnn-nnnn (Harrison ID)
Case C, $500; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case CK470 backhoe, rebuilt pump and bucket cylinder, needs work on outriggers and extension arm, can deliver to the right party; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case DC and SC parts cheap, $10 and up; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case DCs, two tractors, both unrestored, one gas, 1951, SN 5515157 DC, engine stuck, other propane, 1952, SN 5617735 DC, engine free with partial restoration started with functional parts restored, ready to start, both are wheeled with functional tires, $1800 for both; Lorry Dunning nnn-nnn-nnnn or xxxx@xxxx.xxx (Davis CA)
Case Model 19-25; Tom Treadway nnn-nnn-nnnn (Pleasant Hill OR)
Case S wide front axle with wishbone, front wheels, drag link, $125; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case VA parts and adjustable wide front axle; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Case VAC-11, 1953, SN 5750457, mechanically and cosmetically restored in 2019, tires 80%, $2900; Roy Wilber nnn-nnn-nnnn (Boring OR)
Case/David Brown 990, runs fine, rebuilt 3pt hydraulics, draft control valve and remote take off, new clutch, needs power steering work, will deliver to right party, $3000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case/Terratrac M3B, very rare, crawler forklift made from Case 310, only about 80 of these were made in the 50s, four cylinder gas, very nice shape throughout, probably one of the nicest to exist, $9500 or reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar 10 parts, pile of miscellaneous parts, few Cat 20 and 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Cleveland General GG, engine stuck, has a car front axle, have a correct front end to install, PTO with belt pully drive, no pulley, $250; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)
Earthmaster model C, 1950, restored, made in Burbank CA, came with plow, box scraper, spring tooth and disc, $5200; Les Alexander nnn-nnn-nnnn (Alturas CA)
Farmall 350, 1958, diesel, not running, not stuck, missing radiator, grille, pan seat and one diesel emblem, single front wheel, rear tires are usable; Ken nnn-nnn-nnnn landline with no voicemail (Portland OR)
Farmall 404, early 60s for parts, wide front, tractor is complete minus rear tires and rims, $400; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall 450 wide front end, International factory wide front, would fit other Farmall models, good condition, $750; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)
Farmall A, 1939, 295th off assembly line, built in Chicago and sold in Sacramento, one of the first to the west coast, original condition with newer rubber, $1800; Todd nnn-nnn-nnnn (Placerville CA)
Farmall AV, 1947, high crop, rare collector, parade tractor, just rebuilt engine, new electrical system, new Firestone tires, quick mount safety step, looks, runs and drives like new, runs as good or better than it did 73 years ago at the factory in Chicago, all trades considered, serious buyers email for pictures; Jake nnn-nnn-nnnn or xxxx@xxxx.xxx (Adrian OR)
Farmall C, complete with hydraulics, starter, generator, carburetor, etc., but likely stuck, $600. Great for restoration, yard art, or parts. Email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall M, 1948, does not run, tires are all bad, back rims are bad, sheet metal is good, rest of it is complete, wide front, $700; John Calvert nnn-nnn-nnnn (Stagecoach NV)
Ford 2N or 8N original top link, adjustable, nice condition, $135 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Ford 420, 1977, with loader and Gannon scraper, new bucket cylinders, diesel engine, new rear tires, serviceable 11/16 fronts, $5000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 8N, 1949, excellent tires and tin, 12V, new plugs, carburetor, lights, recent restoration, chains and plow, $2400; Frank nnn-nnn-nnnn (Manning OR)
Ford 8N, 1952, full quality restoration, side mount distributor, front and rear wheel weights, original owner’s manual from 52, new tires, 12V conversion, even has the drawbar, runs perfect, 99.9% to original showroom condition, perfect man cave centerpiece, parade worthy or an addition to any collection, $5900, can ship anywhere; Mark nnn-nnn-nnnn (Redding CA)
Ford 8N, tractor, very nice, rebuilt motor, new paint, good tires, 12V, $2750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 9N, 1940, with Howard Rotovator rototiller, has front hydraulic pump, three speed Sherman transmission and Howard reduction gear, ran when parked, been sitting for two years, good sheet metal, $2750; Fred nnn-nnn-nnnn (Bandon OR)
Ford Golden Jubilee, 1953, runs good, new fuel tank and grille, factory front end loader, pictures available, $3400; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Ford N series factory bolt on PTO adapter for small shaft to standard size, $30; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Fordson tractor parts including really nice (desert) fenders, $450 obo. Nice steel rear wheels with grousers, $375/pair obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Fordsons, two tractors, unrestored, engines stuck, one 1919, partial SN 4013?, one 1927, SN 734707, $1400 for both tractors; Lorry Dunning nnn-nnn-nnnn or xxxx@xxxx.xxx (Davis CA)
Gasket: John Deere 60, less carburetor gasket, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Gibson Tug, disassembled, has all the name plates, spare engine, $5200; Buck Evans nnn-nnn-nnnn (Greenville IL)
International 660, $1700; Keith Busack nnn-nnn-nnnn (Longview WA)
John Deer 420C, five roller long track crawler, rare model, heavy duty hydraulic tilt blade, manual angle and hard to find 3pt, no top link, good undercarriage, good sheet metal, canopy, reverser does not work but main transmission works great both reverse and forward gears, has a recent main clutch, steers both ways, this is a very nice hard to find machine, call for info, $7500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 2010, 1961, row crop, parts or restorable, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere 3020, 1966, T113R086427R, 4.4L diesel, 70 hp, synchro transmission, two new batteries, new seat, radiator flushed and cleaned, runs great, showroom clean, $12500 obo; Ronald Polvi nnn-nnn-nnnn (Amity OR)
John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
John Deere 40U, new front tries, new muffler, new oil seal on 3pt. control, $2750; Joe Keith (corrected phone) nnn-nnn-nnnn (Hermiston OR)
John Deere 40U, new front tries, new muffler, new oil seal on 3pt control; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 420 hood and nose piece, some rust and dents, $200 obo for the pair; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere 50, 1953, runs good, electric start, converted to 12V, on rear tire in fair condition, rest are better, single front tire, no smoke, has 3pt but hasn’t been tested, $2000; John Calvert nnn-nnn-nnnn (Stagecoach NV)
John Deere 520 hood, $100; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 5410 weights, six weights, 100 lbs. each, mounting brackets, $600; Ron nnn-nnn-nnnn (Modesto CA)
John Deere 720 nose piece, includes grille, needs paint; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 80, 1955, diesel with pony start and extra pony motor, photos and video available, $10000, can help with transport; Carol Sevold nnn-nnn-nnnn (Milton WA)
John Deere 850, 1989, three-cylinder diesel, 25 hp, 4wd, 3pt, PTO, nice clean tractor, 1253 hours, no loader, $5500; Dennis Gullick nnn-nnn-nnnn (Redwood Valley CA)
John Deere A, unstyled, 1936, not running, best offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere AN, 1937, unstyled, SN 454412, F&H spoke wheels, new tires, radiator shutters, runs and drives well, paint is approximately three years old, $4000; John Bold Jr. nnn-nnn-nnnn or xxxx@xxxx.xxx (Denair CA)
John Deere AR-AO unstyled fuel tank, no leaks, $50; Les Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere B, 1951, parts or restorable, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere B, H, 40, 50, to restore or for parts; Tom Treadway nnn-nnn-nnnn (Pleasant Hill OR)
John Deere belt pulley for 40-420-430, best offer; Dave nnn-nnn-nnnn (Aurora OR)
John Deere belt pulley for L-LA tractor, $200; Dave nnn-nnn-nnnn (Aurora OR)
John Deere flywheel, #F36R, hand start flywheel for early G, $750; Bob nnn-nnn-nnnn text is best (Ridgefield WA)
John Deere LA, 1945, SN 11102, new paint, decals and rubber, photos available, $3500 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere LA, 1946, decent tires, runs good, $1900 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere Lindeman crawler, nice old tractor, always stored inside, $6500; Dave nnn-nnn-nnnn (Aurora OR)
John Deere MC, crawler, nice old tractor, one clutch sticky, this was a one owner tractor in good condition, $2250; Dave nnn-nnn-nnnn (Aurora OR)
John Deere parts: H flywheel, hand start, $125. 1951 JD B head, completely rebuilt, $350. 1951 B intake valves, new in box, B2863R, set of two, $40. 1951 B exhaust valves, new in box, B2503R, set of two, $40. 420U decal set from Jorde, $100; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere parts: lots of miscellaneous for two cylinders crawlers, engine parts, gears, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Massey Ferguson single front wheels, fully mounted, includes mounting bolts, have two, both have good tires, for 1100 series, $250 each or trade; Jake nnn-nnn-nnnn (Adrian OR)
Massey Harris tractors, two tractors in parts, not sure what models, think all the parts are there for both, $400 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
McCormick Deering 15-30, 1933, on steel, runs great, $9550; Les Alexander nnn-nnn-nnnn (Alturas CA)
Minneapolis Moline BF, 3pt, $1250; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)
Minneapolis Moline UTS, 1949, runs good, has wheel weights, straight tin, $1500; Matt Little nnn-nnn-nnnn or xxxx@xxxx.xxx (Harrison ID)
Minneapolis Moline, early 50s, SN 000604785Z, runs good, tricycle, front end loader, power steering assist, new radiator, $3200; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Oliver 60, 1948, rare row crop with factory wide front end, 98% complete including all side curtains and other tin, unrestored but not stuck, easy restoration project, $3200, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Oliver 66 row crop rear side panels, $75 for both; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Oliver 880, diesel, row crop with wide front axle, PTO, hydraulics, 3pt, power steering, good tires; Ken nnn-nnn-nnnn (Eugene OR)
Oliver 88s, two rare “old style” Oliver 88 tractors, one is row crop and other is standard tread, neither are restored but pretty complete, one is a 1947 and the other is a 1948, both have belt pulley and live PTO, standard tread has an early style Oliver live hydraulic system, both are very restorable; Ken nnn-nnn-nnnn (Eugene OR)
Oliver OC3 and HG crawler parts, lots of miscellaneous, engine parts, sheet metal, rollers, etc., would like to sell all, come make an offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Oliver/Cletrac AD, four units, two with dozers, don’t run, $1000 obo; Warren Berg nnn-nnn-nnnn (North Highlands CA)
Parting out Allis Monarch 35 or K; Buck Evans nnn-nnn-nnnn (Greenville IL)
Parts: many extra parts for Minneapolis Moline BF, BF Avery, Cleveland General GG: radiator, grille, fenders, wheels and tires; Don Zimmerman nnn-nnn-nnnn (Hermiston OR)
Tire: brand new, 14.9-28, $225; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Tires, Firestone 7:50/22, NOS, never mounted, new tubes included, $500 for the pair; Larry Schwartz nnn-nnn-nnnn (Centralia WA)
Wheel weights: John Deere part #M1168T, rare, fits JD M front wheels and other tractors, $375 for the pair; Bob nnn-nnn-nnnn text is best (Ridgefield WA)
Wheels, John Deere D, round spoke, pair of fronts, with threaded hub covers, $150; Todd nnn-nnn-nnnn (Placerville CA)
Wheels, steel, set for John Deere GP, good condition, round spokes on front, flat spokes on rear, $950; Todd nnn-nnn-nnnn (Placerville CA)
Wheels, two, 8x24 waffle type, good shape, $400; Vern Fought nnn-nnn-nnnn (Exeter CA)
Yanmar 1610, loader, new tires, one new rim, rebuilt injector pump, $4000; Phil Wall nnn-nnn-nnnn (Enumclaw WA)