30-gallon oil Lubester, nice condition, $75; Mark Willanger nnn-nnn-nnnn (Prescott WA)
Antique trash burner woodstove, built by Frigidaire, $300; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Baker Hamilton tractor seat, spring mounted on a disc, photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Black walnuts, washed and clean, $3/lb. uncracked, $4/lb. cracked; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Book: Old Tractors and the Men Who Love Them, Roger Welch, $10; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Cast iron hacksaw with pulley and several new blades, on two cast iron wheels, cart is oak, $175 or reasonable offer; Bob Johnson nnn-nnn-nnnn (Cedarville CA)
Caterpillar Service manuals for 66AD9 testing and adjusting, powershift transmission, DW10 scraper, sales magazine for Cat 22, D1700, $10-$40. Cat tax for $20. Huge box of Cat O rings, $25. Or obo. Hasler handheld tac, $40. Cat seal installer 7-1/4 inch, $20. Seals for D47U rollers, $2.50. Rebuilt starter for Detroit 92, best offer; Jim Ronsse nnn-nnn-nnnn or xxxx@xxxx.xxx (Chicago Park CA)
Control unit for early double drum Le Tourneau for Caterpillar Sixty, $450 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Deere tractor seat, spring mounted on a disc, photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
DR mower, 344cc Briggs and Stratton motor, runs good, low hours, new transmission, spare transmission included, $1650; Andy nnn-nnn-nnnn no text or xxxx@xxxx.xxx (Gaston OR)
Experimental bush plane, no more flying for this boy, fuselage is covered, has mounts for skis or floats, zero time stand tested engine, spend the winter finishing this baby and be off and flying come spring; Bruce nnn-nnn-nnnn (Redmond OR)
Fairbanks Morse generator, 1946, two-cylinder water cooled, 2250 watts, 36 watts, 32V electric start, runs perfectly, Onan built for Fairbanks Morse, $1500 obo; James Treadwell nnn-nnn-nnnn (Riverside CA)
Feather Weight sewing machine, model 221, in a nice caring case, $550; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Fobs: Sullivan Machinery/The Sulliscrew, $25. Insley, $28. Warner & Swasey, Gradall, $35. Dart, $20. Gar-Bro, $25. Lasting Bonafide Service, LB Smith, $20. Worthington Bluebrute Handheld Rock Drills, $30. International with truck and loader, $25. Caterpillar with loader, $25. Lull, $18. Wabco, $18. Michigan with loader, $25. Gardner-Denver Jackhammer, $28. Cadillac, 1933, $30. Can provide additional information on company inscriptions on back; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Fordson rare aftermarket double drum side mounted winch for a dragline setup, $450 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Gas pump, Wayne 70, missing some parts, but pretty straight, good start for restoration or shop display. 1960s or early 70s Bennett, all there, use or display; Bill Weatherby nnn-nnn-nnnn (Lewiston ID)
Generator, AC, 6.5 kva, 3 phase, 208-240V and 120V, 1800 rpm, Continental four cylinder powered, hood enclosed, trailer mounted with good tires, very clean and low hours, starts and runs nicely, $2000 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Grape crusher, Touluouse and Del Rieux, antique, use for wine making or cider or yard art, crush surface area at the base of the hopper is 11x20 inches, made in San Francisco at 620 Commercial St. (in casting), photos on request, $300; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Honda PA50 moped, 1978, 55 actual miles shown on odometer, runs, $850; Todd nnn-nnn-nnnn (Placerville CA)
Huge black walnut tree, must take down, best offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Hydraulic cylinders, 12’6” long from old loader, $150; Keith Busack nnn-nnn-nnnn (Longview WA)
Hydraulic unit, all in one, ran by PTO or belt pulley, was on a little crawler to lift the blade, includes a driveshaft with a belt pulley which drives a pump with a reservoir tank and lever control all in one, comes with two short hydraulic rams about a foot long, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere “Legacy” 2010 calendar, match to 2021, color, excellent condition, 12”x12”, Voyageur Press, if interested can tell models illustrated, $12; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
John Deere anvil, 5-1/2 inches long, $50; Vern Fought nnn-nnn-nnnn (Exeter CA)
Kitchen wood stove, Montag, built in Portland OR, very good condition, $500; Joe Keith nnn-nnn-nnnn (Hermiston OR)
Loader bucket, John Deere 90, in very good condition, from a 420C loader, $300; Frank nnn-nnn-nnnn leave message (Morgan Hill CA)
Loader, Allis Chalmers, model unknown, similar to loaders used on D-15 tractors, recently used on an International utility tractor, working good, good cylinders and trip bucket, no mounting frame, $350; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)
Log splitter and trailer, heavy duty splitter, great for a do-it-yourself wood gathering, imagine splitting up that pile of wood that takes you months in just an afternoon, take it to the woods with you and split as you go, easier to handle when it is split, not so hard on the back stacking in trailer and unloading; Bruce nnn-nnn-nnnn (Redmond OR)
Magneto books: Fairbanks Morse, Fundamentals of Magneto Ignition, $28. International Magnetos Service Manual for International F-4, F-6, E4A, H-1, Wico H, AH, EK, AP and Splitdorf (Dixie and Aero), $32; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Metal reader board, large, lighted, flashing arrow, all lights work, $400, can send video. Also have several tractor seats, $35 each; Bill Weatherby nnn-nnn-nnnn (Lewiston ID)
Mill circular saw, 48 inch, no teeth, no rust, stored inside, $75; Mike nnn-nnn-nnnn (Puyallup WA)
Mower: John Deere 20 sickle mower for JD M, MT and 40 tractors, extra sickles, parts and operator’s manuals included, $475; Bob nnn-nnn-nnnn text is best (Ridgefield WA)
New Holland, First 100 years, 1895-1995, equipment for early hay, stone crusher, baler, forage harvester, combines, Fiat, Ford/New Holland transition, Versatile, magazine/mailer form, color, 34 pages, $12; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx or 5141 Kimball Rd, Ontario OR 97914 (Ontario OR)
Plow: Allis Chalmers three bottom mounted plow, $300 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Plow: John Deere F120, 3pt, 3-16s, good shape, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Rotovator, 3pt, $400; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Sailboat winches, Anderson stainless steel two speed self-tending, new in box, never used, one 40 ST, $450. One 28 ST $325. Photos on request; Charlie nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Sandblaster, 200 lb. commercial unit, complete with 25 feet of high capacity hose, $300 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Shelfing unit, 87 inches long, 70 inches tall, 24 inches wide, 24 bins that are 10 inch by 11 inch by 17 inches, 12 each side with shelf under it made out of old boards, $50; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Singer 331K5 leather sewing machine, $500; Keith Busack nnn-nnn-nnnn (Longview WA)
Singer Feather Weight sewing machine, in nice carrying case, $550 (corrected price); Joe Keith nnn-nnn-nnnn (Hermiston OR)
Snowmobile, vintage, 1966 Luger, 300cc Kohler, original condition, has not been restored, $1000, can text pictures to seriously interested parties; Tom Street nnn-nnn-nnnn (Bend OR)
Spreader, 3pt, for fertilizer, sand, manure, etc., $350; Fred nnn-nnn-nnnn (Bandon OR)
Stearman airplane, retired from flying and need to get the plane to a new home, need a project for those long winter nights and boring days at home? Love the bark and growl of a round engine and the graceful old-time biplane? Plane is in cover stage, multiple parts collected over the years, all go with the project; Bruce nnn-nnn-nnnn (Redmond OR)
Table saw, 10-inch, older Sears unit, on a stand with casters, cast iron table with two wings, fence and miter, one hp motor, nice shape, $200 obo; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)
Tank, steel, riveted, 20-inch-wide, 60-inch-high, $50. Also, steel riveted tank on trailer, has several threaded openings for pipe fittings, $200, email for pictures; Paul nnn-nnn-nnnn or xxxx@xxxx.xxx (Cochise AZ)
Toro front blade, $175; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Toro rotovator drive shaft, $275; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Trailer, single axle fifth wheel, 12’x5-1/2’, $750; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Walnuts, new crop, in shell, $2/lb. FOB ranch; Ron nnn-nnn-nnnn (Modesto CA)
Water pump, compact, 20000 gph, US Navy with Wisconsin engine, not running engine is not stuck, about $400, $125; Todd nnn-nnn-nnnn (Placerville CA)
Weights, Ford suitcase, 10-40 kg, with mounting bracket, $800, email for pictures; Paul nnn-nnn-nnnn or xxxx@xxxx.xxx (Cochise AZ)
Wood block and tackle unit, displayed in our fruit stand for years, very nice rope and pulleys, $95; Mike nnn-nnn-nnnn (Puyallup WA)
Yard art eight-foot fertilizer spreader, has a wheel and tire on each end with a bin in between, $75; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)